Difference between revisions of "VTube Software Updates"

From ATTWiki
Jump to: navigation, search
 
Line 15: Line 15:
 
</table>
 
</table>
 
__NOTOC__
 
__NOTOC__
 +
 +
 +
 +
<table cellpadding="5" width="700">
 +
 +
<tr>
 +
<td width="150">February 9, 2012</td>
 +
<td width="200">[[VTube-LASER v1.75.4]]</td>
 +
<td width="200">Merge bends feature</td>
 +
<td>[[image:vtube-laser_1_75.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">February 7, 2012</td>
 +
<td width="200">[[VTube-LASER v1.75.3]]</td>
 +
<td width="200">Automatic Closeup of Last Measure feature.</td>
 +
<td>[[image:vtube-laser_1_73.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">February 2, 2012</td>
 +
<td width="200">[[VTube-LASER v1.75.1]]</td>
 +
<td width="200">Page numbers are added to bottom of report.  Fix to move to previous when remeasure.</td>
 +
<td>[[image:vtube-laser_1_73.jpg|150px]]</td>
 +
</tr>
 +
 +
 +
<tr>
 +
<td width="150">January 15, 2012</td>
 +
<td width="200">[[VTube-LASER v1.75]]</td>
 +
<td width="200">Scanner setup save to project is enhanced.  The cylinder fit tolerance qualification is enhanced for better measuring experience.  New cylinder fit error checks are added to assure good measurements.</td>
 +
<td>[[image:vtube-laser_1_73.jpg|150px]]</td>
 +
</tr>
 +
 +
 +
<tr>
 +
<td width="150">January 5, 2012</td>
 +
<td width="200">[[VTube-LASER v1.74]]</td>
 +
<td width="200">Scanner setup is now saved with the project file.  It is now possible to skip either end measurement.  The end-scan qualification logic is improved.</td>
 +
<td>[[image:vtube-laser_1_73.jpg|150px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
 +
==== [[image:Gears_view_small.png]] VTube-LASER - Fourth Quarter - 2011====
 +
 +
<table cellpadding="5" width="700">
 +
 +
<tr>
 +
<td width="150">October 19, 2011</td>
 +
<td width="200">[[VTube-LASER v1.73]]</td>
 +
<td width="200">Fine tuning for FARO Edge arm.  The Cut Plane offset value is now displayed in interface.  Cut Plane offset is now adjustable without remeasure.  Sounds trimmed so that they play for shorter times.</td>
 +
<td>[[image:vtube-laser_1_73.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">October 10, 2011</td>
 +
<td width="200">[[VTube-LASER v1.72]]</td>
 +
<td width="200">Deep scanning with up to 200 stripes per straight now allowed.</td>
 +
<td>[[image:vtube-laser_1_71b.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">October 4, 2011</td>
 +
<td width="200">[[VTube-LASER v1.71]]</td>
 +
<td width="200">New transparent envelope models.</td>
 +
<td>[[image:vtube-laser_1_71b.jpg|150px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
==== [[image:Gears_view_small.png]] VTube-LASER - Third Quarter - 2011====
 +
 +
<table cellpadding="5" width="700">
 +
 +
<tr>
 +
<td width="150">September 20, 2011</td>
 +
<td width="200">[[VTube-LASER v1.70]]</td>
 +
<td width="200">Enhanced the accuracy of inspection mathematics in special situations.</td>
 +
<td>[[image:vtube-laser_1_70.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">September 1, 2011</td>
 +
<td width="200">[[VTube-LASER v1.69]]</td>
 +
<td width="200">Enhanced Measure Setup menu links to more Faro menus.  New report values show arm and probe values like calibration dates, 2 sigma values.  VTube-LASER Programmer license mode.</td>
 +
<td>[[image:vtube-laser_1_69.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">August 8, 2011</td>
 +
<td width="200">[[VTube-LASER v1.68]]</td>
 +
<td width="200">New Excel report builder, revised Overbend calculator, new options in the Bender Setup screen, new tab menus in Master data.</td>
 +
<td>[[image:vtube-laser_excel.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">July 18, 2011</td>
 +
<td width="200">[[VTube-LASER v1.67]]</td>
 +
<td width="200">New Split Bend for precisely splitting angles that approach and exceed 180 degrees. New connect and disconnect from the arm.</td>
 +
<td>[[image:vtube-laser_screen_1_67.jpg|150px]]</td>
 +
</tr>
 +
 +
 +
</table>
 +
 +
==== [[image:Gears_view_small.png]] VTube-LASER - Second Quarter - 2011====
 +
 +
<table cellpadding="5" width="700">
 +
 +
<tr>
 +
<td width="150">May 27, 2011</td>
 +
<td width="200">[[VTube-LASER v1.66]]</td>
 +
<td width="200">New save changes dialog, in-process bend angle correction</td>
 +
<td>[[image:vtube-laser_screen_1_66.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">May 19, 2011</td>
 +
<td width="200">[[VTube-LASER v1.65]]</td>
 +
<td width="200">Increased the accuracy of the radius stripe scan method for measuring bend radii, enhanced the Winton bender protocol, added invert rotation check boxes to the bender setup page, added new report charts</td>
 +
<td>[[image:vtube-laser_screen_1_65.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">May 10, 2011</td>
 +
<td width="200">[[VTube-LASER v1.64b]]</td>
 +
<td width="200">Added Transfluid bender communications, added new radius stripe scan method for measuring bend radii</td>
 +
<td>[[image:vtube-laser-transfluid_communication.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">April 6, 2011</td>
 +
<td width="200">[[VTube-LASER v1.63d]]</td>
 +
<td width="200">Resolved issue with end-scan qualification with ball probe</td>
 +
<td>[[image:Vtube-laser_1_63.jpg|150px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
==== [[image:Gears_view_small.png]] VTube-LASER - First Quarter - 2011====
 +
 +
<table cellpadding="5" width="700">
 +
 +
<tr>
 +
<td width="150">March 31, 2011</td>
 +
<td width="200">[[VTube-LASER v1.63]]</td>
 +
<td width="200">Choose from multiple custom reports on the screen.  Add and edit custom report templates to VTube-LASER.</td>
 +
<td>[[image:Vtube-laser_1_63.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">March 11, 2011</td>
 +
<td width="200">[[VTube-LASER v1.62]]</td>
 +
<td width="200">End scan qualifications are much faster, new progress dialog for when end-scan is taking more time with new process cancel button</td>
 +
<td>[[image:Vtube-laser_1_62.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">March 04, 2011</td>
 +
<td width="200">[[VTube-LASER v1.61]]</td>
 +
<td width="200">New end labels identify the ends of the tube and automatic diameter handling fixes</td>
 +
<td>[[image:Vtube-laser_1_61.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">February 21, 2011</td>
 +
<td width="200">[[VTube-LASER v1.6]]</td>
 +
<td width="200">Important end-scan outlier point detection and prevention, continuous tactile scan, faster redraws, improved user interface</td>
 +
<td>[[image:Vtube-laser_1_6.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">February 7, 2011</td>
 +
<td width="200">[[VTube-LASER v1.59]]</td>
 +
<td width="200">Ball probe measurements and laser measurements now work properly together in the same tube measure.</td>
 +
<td>[[image:Vtube-laser_1_57.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">January 18, 2011</td>
 +
<td width="200">[[VTube-LASER v1.58]]</td>
 +
<td width="200">New "Construct Tube" feature that allows users to route a tube in 3D space by pointing the arm, increase or decrease points and straights on the fly when measuring tubes</td>
 +
<td>[[image:Vtube-laser_1_58_constructtube_closeup.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">January 13, 2011</td>
 +
<td width="200">[[VTube-LASER v1.57]]</td>
 +
<td width="200">Supravision Import, faster alignment, improved Bender Setup, many other changes</td>
 +
<td>[[image:vtube-laser_1_57.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">January 6, 2011</td>
 +
<td width="200">[[VTube-LASER v1.56]]</td>
 +
<td width="200">New springback compensation variables, new items in the inspection report - like the new XYZ deviation report, bender data setup menu enhanced, invert rotation feature</td>
 +
<td>[[image:vtube-laser_1_56_bendersetupmenu.jpg|150px]]</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="150">January 3, 2011</td>
 +
<td width="200">[[VTube-LASER v1.55]]</td>
 +
<td width="200">New enhanced radius measurement</td>
 +
<td>[[image:vtube-laser_radius_segment_measurement_graphic.jpg|150px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
==== [[image:Gears_view_small.png]] VTube-LASER - Fourth Quarter - 2010====
 +
<table>
 +
 +
 +
<tr>
 +
<td width="150">December 25, 2010</td>
 +
<td width="200">[[VTube-LASER v1.54]]</td>
 +
<td width="200">New DRO (digital readout), realtime intersection points, other enhancements </td>
 +
<td>[[image:vtube-laser_dro_closeup.jpg|150px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
<br><br>
 +
  
  

Revision as of 19:54, 27 February 2012

Vtube-laser logo.jpg See a complete list of VTube updates on this page.

Vtube-laser 1 73.jpg



February 9, 2012 VTube-LASER v1.75.4 Merge bends feature Vtube-laser 1 75.jpg
February 7, 2012 VTube-LASER v1.75.3 Automatic Closeup of Last Measure feature. Vtube-laser 1 73.jpg
February 2, 2012 VTube-LASER v1.75.1 Page numbers are added to bottom of report. Fix to move to previous when remeasure. Vtube-laser 1 73.jpg
January 15, 2012 VTube-LASER v1.75 Scanner setup save to project is enhanced. The cylinder fit tolerance qualification is enhanced for better measuring experience. New cylinder fit error checks are added to assure good measurements. Vtube-laser 1 73.jpg
January 5, 2012 VTube-LASER v1.74 Scanner setup is now saved with the project file. It is now possible to skip either end measurement. The end-scan qualification logic is improved. Vtube-laser 1 73.jpg


Gears view small.png VTube-LASER - Fourth Quarter - 2011

October 19, 2011 VTube-LASER v1.73 Fine tuning for FARO Edge arm. The Cut Plane offset value is now displayed in interface. Cut Plane offset is now adjustable without remeasure. Sounds trimmed so that they play for shorter times. Vtube-laser 1 73.jpg
October 10, 2011 VTube-LASER v1.72 Deep scanning with up to 200 stripes per straight now allowed. Vtube-laser 1 71b.jpg
October 4, 2011 VTube-LASER v1.71 New transparent envelope models. Vtube-laser 1 71b.jpg

Gears view small.png VTube-LASER - Third Quarter - 2011

September 20, 2011 VTube-LASER v1.70 Enhanced the accuracy of inspection mathematics in special situations. Vtube-laser 1 70.jpg
September 1, 2011 VTube-LASER v1.69 Enhanced Measure Setup menu links to more Faro menus. New report values show arm and probe values like calibration dates, 2 sigma values. VTube-LASER Programmer license mode. Vtube-laser 1 69.jpg
August 8, 2011 VTube-LASER v1.68 New Excel report builder, revised Overbend calculator, new options in the Bender Setup screen, new tab menus in Master data. Vtube-laser excel.jpg
July 18, 2011 VTube-LASER v1.67 New Split Bend for precisely splitting angles that approach and exceed 180 degrees. New connect and disconnect from the arm. Vtube-laser screen 1 67.jpg

Gears view small.png VTube-LASER - Second Quarter - 2011

May 27, 2011 VTube-LASER v1.66 New save changes dialog, in-process bend angle correction Vtube-laser screen 1 66.jpg
May 19, 2011 VTube-LASER v1.65 Increased the accuracy of the radius stripe scan method for measuring bend radii, enhanced the Winton bender protocol, added invert rotation check boxes to the bender setup page, added new report charts Vtube-laser screen 1 65.jpg
May 10, 2011 VTube-LASER v1.64b Added Transfluid bender communications, added new radius stripe scan method for measuring bend radii Vtube-laser-transfluid communication.jpg
April 6, 2011 VTube-LASER v1.63d Resolved issue with end-scan qualification with ball probe Vtube-laser 1 63.jpg

Gears view small.png VTube-LASER - First Quarter - 2011

March 31, 2011 VTube-LASER v1.63 Choose from multiple custom reports on the screen. Add and edit custom report templates to VTube-LASER. Vtube-laser 1 63.jpg
March 11, 2011 VTube-LASER v1.62 End scan qualifications are much faster, new progress dialog for when end-scan is taking more time with new process cancel button Vtube-laser 1 62.jpg
March 04, 2011 VTube-LASER v1.61 New end labels identify the ends of the tube and automatic diameter handling fixes Vtube-laser 1 61.jpg
February 21, 2011 VTube-LASER v1.6 Important end-scan outlier point detection and prevention, continuous tactile scan, faster redraws, improved user interface Vtube-laser 1 6.jpg
February 7, 2011 VTube-LASER v1.59 Ball probe measurements and laser measurements now work properly together in the same tube measure. Vtube-laser 1 57.jpg
January 18, 2011 VTube-LASER v1.58 New "Construct Tube" feature that allows users to route a tube in 3D space by pointing the arm, increase or decrease points and straights on the fly when measuring tubes Vtube-laser 1 58 constructtube closeup.jpg
January 13, 2011 VTube-LASER v1.57 Supravision Import, faster alignment, improved Bender Setup, many other changes Vtube-laser 1 57.jpg
January 6, 2011 VTube-LASER v1.56 New springback compensation variables, new items in the inspection report - like the new XYZ deviation report, bender data setup menu enhanced, invert rotation feature Vtube-laser 1 56 bendersetupmenu.jpg
January 3, 2011 VTube-LASER v1.55 New enhanced radius measurement Vtube-laser radius segment measurement graphic.jpg

Gears view small.png VTube-LASER - Fourth Quarter - 2010

December 25, 2010 VTube-LASER v1.54 New DRO (digital readout), realtime intersection points, other enhancements Vtube-laser dro closeup.jpg




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_Software_Updates&oldid=17713"