Difference between revisions of "VTube-LASER"

From ATTWiki
Jump to: navigation, search
(→‎VTube-LASER Potential Clients)
(→‎VTube-LASER Potential Clients)
Line 34: Line 34:
 
===VTube-LASER Potential Clients===
 
===VTube-LASER Potential Clients===
 
Example potential clients:<br>
 
Example potential clients:<br>
−
* '''Client Example 1''':  A manufacturer of excavators uses VTube to check the hydraulic lines coming in from a vendor.<br><br>
+
<table>
−
* '''Client Example 2''': A manufacturer of hydro formed truck frames to adjust benders so that the pipe fits into pre-crush presses.<br><br>
+
−
* '''Client Example 3''': A manufacturer that fabricates tube for the large truck industry.  They adjust a bank of benders that are connected directly to VTube-LASER.<br><br>
+
−
* '''Client Example 4''': A manufacturer that fabricates pipe for the oil industry.  They adjust very large benders that are connected to VTube-LASER<br><br>
+
−
* '''Client Example 5''': A manufacturer of undersea oil caps that have hundreds of hydraulic lines.  They reverse-engineer mock-ups for fabrication.<br><br>
+
  
 +
<tr>
 +
<td width=100>
 +
'''Client Example 1'''
 +
</td>
 +
<td width=300>
 +
A manufacturer of excavators uses VTube to check the hydraulic lines coming in from a vendor.
 
</td>
 
</td>
 
</tr>
 
</tr>
 +
 +
<tr>
 +
<td width=100>
 +
'''Client Example 2'''
 +
</td>
 +
<td width=300>
 +
A manufacturer of hydro formed truck frames to adjust benders so that the pipe fits into pre-crush presses.
 +
</td>
 +
</tr>
 +
 +
<tr>
 +
<td width=100>
 +
'''Client Example 3'''
 +
</td>
 +
<td width=300>
 +
A manufacturer that fabricates tube for the large truck industry.  They adjust a bank of benders that are connected directly to VTube-LASER.
 +
</td>
 +
</tr>
 +
 +
<tr>
 +
<td width=100>
 +
'''Client Example 3'''
 +
</td>
 +
<td width=300>
 +
A manufacturer that fabricates tube for the large truck industry.  They adjust a bank of benders that are connected directly to VTube-LASER.
 +
</td>
 +
</tr>
 +
 +
<tr>
 +
<td width=100>
 +
'''Client Example 4'''
 +
</td>
 +
<td width=300>
 +
A manufacturer that fabricates pipe for the oil industry.  They adjust very large benders that are connected to VTube-LASER.
 +
</td>
 +
</tr>
 +
 +
<tr>
 +
<td width=100>
 +
'''Client Example 5'''
 +
</td>
 +
<td width=300>
 +
A manufacturer of undersea oil caps that have hundreds of hydraulic lines.  They reverse-engineer mock-ups for fabrication.
 +
</td>
 +
</tr>
 +
 
</table>
 
</table>
  

Revision as of 00:50, 31 October 2012

Vtube-laser logo.jpg Connect to a FARO ScanArm, measure tube shapes, and correct benders.

Faro edge.jpg

Vtube-laser 1.77.3.jpg


Executive Summary

VTube-LASER Description

VTube-LASER uses the laser scanner and/or ball probe to:

  1. Measure tube, pipe, and wire shapes
  2. Qualify the shape or path of the part based on centerline tolerances
  3. Correct bending machines
  4. Reverse-engineer existing parts
  5. Print reports
  6. Quickly import and export tube data from other software
  7. Remove the need for tube fixtures and gauges to qualify parts.


VTube-LASER Potential Clients

Example potential clients:

Client Example 1

A manufacturer of excavators uses VTube to check the hydraulic lines coming in from a vendor.

Client Example 2

A manufacturer of hydro formed truck frames to adjust benders so that the pipe fits into pre-crush presses.

Client Example 3

A manufacturer that fabricates tube for the large truck industry. They adjust a bank of benders that are connected directly to VTube-LASER.

Client Example 3

A manufacturer that fabricates tube for the large truck industry. They adjust a bank of benders that are connected directly to VTube-LASER.

Client Example 4

A manufacturer that fabricates pipe for the oil industry. They adjust very large benders that are connected to VTube-LASER.

Client Example 5

A manufacturer of undersea oil caps that have hundreds of hydraulic lines. They reverse-engineer mock-ups for fabrication.

Software Updates


Videos


Tutorials and Information


VTube Related Program IDs Used for Licensing

PID Program Licensed
354 VTube-STEP
355 VTube-Pro
356 VTube-LASER
360 VTube-LASER Programmer


Other Pages
Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER&oldid=20039"