CNC Bender

From ATTWiki
Revision as of 14:30, 20 July 2006 by Mcone (Talk | contribs)

Jump to: navigation, search

Contents


FAQ






Tutorials

Diagnostics

Diagnostic Steps for Master Power On Problems


General Information

About Top Hats (Schneider Momentum Ethernet Adapters)
Downloading Top Hat Setup Software for Top Hat setup
Downloading I2T HMI Software


Configuration

About main.axislist file
About CNCProcessor.cfg file



Version Enhancements

July 17, 2006
Version 10.0.5.9 Released - Axis Enable Delay After Cycle Start is added. This feature delays the moment of ENABLE by a millisecond value in order to give the axis drives time to boot.

May 15, 2006

  1. CNC Bender 10.0.5.7e - Dynamic Correction - This new feature allows for real-time correction and adjustment of the bender for each part.

  2. CNC Bender 10.0.5.7e - New Graphic Window - Now handles bends equal to or greater than 180 degrees

  3. CNC Bender 10.0.5.7e - Auto Dynamic Option Update - Easier automated update process