Delay After Cycle Start

What is It?

Delay After Cycle Start is a property in the main.axislist file in CNC Bender software.

Using the Value

Each of the sections in the main.axislist is set apart with an axis section label like this:

[Axis 1]

The value for each axis section can be set in milliseconds like this:

Delay After Cycle Start = 250

The axis with the highest value controls when all axes are enabled. For example, axis 3 may be set to 3000 (3 seconds), and the rest set to 250 (1/4 second). In this case, all axes will start after 3 seconds of delay.

--Mcone 10:45, 17 July 2006 (EDT)