Difference between revisions of "CNC Bender"

From ATTWiki
Jump to: navigation, search
(General Information)
(Version Enhancements)
Line 51: Line 51:
  
 
=== Version Enhancements ===
 
=== Version Enhancements ===
 +
October 27,2006
 +
# '''[[CNC Bender 10.0.6.0i - SVout Export Feature]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - Persistent Clipboard for Keyboard]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - Optimized COMDEF and CIO Archiving]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - New Error Handling and Logging System]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - Replaced Up-Down Buttons]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - Combined Logs Menu]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - TCP-IP Error Detection System]]'''<BR><BR>
 +
# '''[[CNC Bender 10.0.6.0i - TCP-IP Error System Is More Patient]]'''<BR><BR>
  
 
July 17, 2006<br>
 
July 17, 2006<br>
Version 10.0.5.9 Released - Axis Enable [[Delay After Cycle Start]] is added.  This feature delays the moment of ENABLE by a millisecond value in order to give the axis drives time to boot.
+
Version 10.0.5.9 Released - Axis Enable [[Delay After Cycle Start]] is added.  This feature delays the moment of ENABLE by a millisecond value in order to give the axis drives time to boot.<BR><BR>
  
 
May 15, 2006
 
May 15, 2006

Revision as of 21:35, 1 November 2006

Contents


FAQ






Tutorials

Diagnostics

Diagnostic Steps for Master Power On Problems


General Information

About Top Hats (Schneider Momentum Ethernet Adapters)
Downloading Top Hat Setup Software for Top Hat setup
Downloading I2T HMI Software
About Pressure Die Boost

Configuration

About main.axislist file
About CNCProcessor.cfg file



Version Enhancements

October 27,2006

  1. CNC Bender 10.0.6.0i - SVout Export Feature

  2. CNC Bender 10.0.6.0i - Persistent Clipboard for Keyboard

  3. CNC Bender 10.0.6.0i - Optimized COMDEF and CIO Archiving

  4. CNC Bender 10.0.6.0i - New Error Handling and Logging System

  5. CNC Bender 10.0.6.0i - Replaced Up-Down Buttons

  6. CNC Bender 10.0.6.0i - Combined Logs Menu

  7. CNC Bender 10.0.6.0i - TCP-IP Error Detection System

  8. CNC Bender 10.0.6.0i - TCP-IP Error System Is More Patient

July 17, 2006
Version 10.0.5.9 Released - Axis Enable Delay After Cycle Start is added. This feature delays the moment of ENABLE by a millisecond value in order to give the axis drives time to boot.

May 15, 2006

  1. CNC Bender 10.0.5.7e - Dynamic Correction - This new feature allows for real-time correction and adjustment of the bender for each part.

  2. CNC Bender 10.0.5.7e - New Graphic Window - Now handles bends equal to or greater than 180 degrees

  3. CNC Bender 10.0.5.7e - Auto Dynamic Option Update - Easier automated update process