Difference between revisions of "VTube-LASER"

From ATTWiki
Jump to: navigation, search
(→‎VTube-LASER Potential Clients)
(→‎VTube-LASER Potential Clients)
Line 65: Line 65:
 
<tr>
 
<tr>
 
<td width=200>
 
<td width=200>
−
'''Oil Industry'''
+
'''Mining Industry'''
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
−
A manufacturer that fabricates pipe for the oil industry.  They adjust very large benders that are connected to VTube-LASER.
+
A manufacturer that fabricates pipe for the mining industry.  They adjust very large benders that are connected to VTube-LASER.
 
</td>
 
</td>
 
</tr>
 
</tr>
Line 74: Line 74:
 
<tr>
 
<tr>
 
<td width=100>
 
<td width=100>
−
'''Client 5'''
+
'''Oil Industry'''
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>

Revision as of 00:53, 31 October 2012

Vtube-laser logo.jpg Connect to a FARO ScanArm, measure tube shapes, and correct benders.

Faro edge.jpg

Vtube-laser 1.77.3.jpg


Executive Summary

VTube-LASER Description

VTube-LASER uses the laser scanner and/or ball probe to:

  1. Measure tube, pipe, and wire shapes
  2. Qualify the shape or path of the part based on centerline tolerances
  3. Correct bending machines
  4. Reverse-engineer existing parts
  5. Print reports
  6. Quickly import and export tube data from other software
  7. Remove the need for tube fixtures and gauges to qualify parts.


VTube-LASER Potential Clients

Example potential clients:

Excavators

A manufacturer of excavators uses VTube to check the hydraulic lines coming in from a vendor.

Truck Frames

A manufacturer of hydro formed truck frames to adjust benders so that the pipe fits into pre-crush presses.

Fuel/Brake Lines

A manufacturer that fabricates tube for the large truck industry. They adjust a bank of benders that are connected directly to VTube-LASER.

Mining Industry

A manufacturer that fabricates pipe for the mining industry. They adjust very large benders that are connected to VTube-LASER.

Oil Industry

A manufacturer of undersea oil caps that have hundreds of hydraulic lines. They reverse-engineer mock-ups for fabrication.



Software Updates


Videos


Tutorials and Information


VTube Related Program IDs Used for Licensing

PID Program Licensed
354 VTube-STEP
355 VTube-Pro
356 VTube-LASER
360 VTube-LASER Programmer


Other Pages
Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER&oldid=20044"