Vector Tube Data Center

From ATTWiki
Revision as of 02:32, 10 June 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Vector tube data center logo.jpg
Vector tube data center.jpg

Vector tube data center sensor.jpg

SOFTWARE

Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers. Laservision software is one of the most logical for intelligent communications: It does not RECALL data from benders unless a RECALL is required. Also, its user interface is easy to learn because it leads operators through inspections using a step by step process.

COMMUNICATION Ports

Vector Tube Data Centers include 10 current loop ports that communicate using the legacy Eaton Leonard communications protocol. We have electronics that connect directly to the current loop ports on Vector Tube Data Centers. See the Benderlink Ethernet Module page for more information about our long-distance electronics.

Vector tube data center longtable.jpg

APPLICATION Information

EL Laservision Tube Data Center.jpg

Eaton Leonard Vector Tube Data Center and BLM Benders
Blinkblm vector datasheet image.jpg

Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and BLM Benders.

See also Benderlink for BLM

Eaton Leonard Vector Tube Data Center and AddisonMckee Benders
Blinkaddison vector datasheet image.jpg

Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and AddisonMckee Benders.

See also Vector Tube Data Center


These software packages can communicate with Laservision-based measuring centers: