Difference between revisions of "Vector Tube Data Center"

From ATTWiki
Jump to: navigation, search
(SOFTWARE)
 
(7 intermediate revisions by one user not shown)
Line 12: Line 12:
  
 
==SOFTWARE==
 
==SOFTWARE==
Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers.  Laservision software is one of the most logical for intelligent communications: It does not RECALL data from benders unless a RECALL is required.  Also, its user interface is easy to learn because it leads operators through inspections using a step by step process.
+
Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers.  In our opinion, Laservision software is one of the most logically-designed process for bi-directional communication.  For example, it does not recall data from benders during corrections loops unless a correction is needed.  Also, its user interface leads operators through the inspection process using a simple step by step process.
 
<br><br>
 
<br><br>
  
Line 64: Line 64:
 
*[[Benderlink for MiiC]]
 
*[[Benderlink for MiiC]]
 
*[[Benderlink for Pines]]
 
*[[Benderlink for Pines]]
 +
*[[Benderlink for CRIPPA]]
  
 +
== LASERVISION SUPPORT ==
 +
 +
If you have questions or need support with your Laservision-based measuring center please contact Numalliance
 +
 +
+52 442 212 3651 <br>
 +
 +
  
 
<br>
 
<br>
 
<br>
 
<br>

Latest revision as of 12:42, 16 March 2023

Vector tube data center logo.jpg
Vector tube data center.jpg

Vector tube data center sensor.jpg

Contents

SOFTWARE

Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers. In our opinion, Laservision software is one of the most logically-designed process for bi-directional communication. For example, it does not recall data from benders during corrections loops unless a correction is needed. Also, its user interface leads operators through the inspection process using a simple step by step process.

COMMUNICATION Ports

Vector Tube Data Centers include 10 current loop ports that communicate using the legacy Eaton Leonard communications protocol. We have electronics that connect directly to the current loop ports on Vector Tube Data Centers. See the Benderlink Ethernet Module page for more information about our long-distance electronics.

Vector tube data center longtable.jpg

APPLICATION Information

EL Laservision Tube Data Center.jpg

Eaton Leonard Vector Tube Data Center and BLM Benders
Blinkblm vector datasheet image.jpg

Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and BLM Benders.

See also Benderlink for BLM

Eaton Leonard Vector Tube Data Center and AddisonMckee Benders
Blinkaddison vector datasheet image.jpg

Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and AddisonMckee Benders.

See also Vector Tube Data Center


These software packages can communicate with Laservision-based measuring centers:

LASERVISION SUPPORT

If you have questions or need support with your Laservision-based measuring center please contact Numalliance

+52 442 212 3651

[email protected]