Revision: Benderlink for Chiyoda/Keins 6.94

From ATTWiki
Revision as of 15:07, 1 April 2015 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Blink keinschiyoda orangefire.jpg

Revision 6.94

Back to Benderlink for Chiyoda
Back to Benderlink for KEINS
Back to Benderlink for Chiyoda/KEINS Revisions

Blink keinschiyoda screens 6.1.jpg


Check.jpg UPDATED - The Embedded VTube-STEP is Now Version 2

The previous Benderlink had included version 1.99. This version includes VTube-STEP version 1.99 that improves the calculation of centerlines from rough solid models. This new version is embedded in this version of Benderlink.

Vtube-step-1.87 screenimage.png



Check.jpg ENHANCED - Transfer of XYZ Data from Measuring Centers

Handling XYZ Data Transfers

XYZ data is now transferred in both directions for storage in both the touch-screen bender controls and in Benderlink data files.

Handling RADIUS Data Transfers (For Radius Values Sent with the XYZ Data)

The RADIUS values sent with the XYZ data are stored only in the Benderlink data files. They are not transferred to the bender control. This ensures that the original design values are always returned to DOCs software during DOCs data RECALLS.

This feature was added for the Hexagon ROMER DOCS measuring software which requires that the MASTER XYZ and XYZ RADIUS data be returned from the bender during RECALL transfers.

Benderlink chiyodakeins 6.92 xyzcoordinates.png

Check.jpg NEW: About Button

  • An About button is added to the main interface in the top right corner. This allows you to check the current version of Benderlink at any time.

Benderlink chiyodakeins 6.92 aboutbutton.png



OTHER PAGES