Difference between revisions of "Benderlink for Chiyoda"

From ATTWiki
Jump to: navigation, search
(LICENSE TYPES)
(REVISIONS)
Line 90: Line 90:
  
 
<table>
 
<table>
 +
<tr><td>October 22, 2008</td><td>[[Revision: Benderlink for Chiyoda/Keins 5.93]]</td></tr>
 
<tr><td>May 29, 2008</td><td>[[Revision: Benderlink for Chiyoda/Keins 5.92]]</td></tr>
 
<tr><td>May 29, 2008</td><td>[[Revision: Benderlink for Chiyoda/Keins 5.92]]</td></tr>
 
<tr><td>May 6, 2008</td><td>[[Revision: Benderlink for Chiyoda/Keins 5.91]]</td></tr>
 
<tr><td>May 6, 2008</td><td>[[Revision: Benderlink for Chiyoda/Keins 5.91]]</td></tr>

Revision as of 19:05, 21 November 2008

Blink chiyoda keins 5 82 main1.jpg


This software is designed to communicate with Chiyoda and KEINS benders.

Contents

MAIN FEATURES

Feature Description
1 It allows for intelligent bi-directional communications with measuring centers.
2 It allows for true DNC offline programming. This means that you can control every setup parameter from Benderlink


(Note: All operator accessible parameters are programmable in touch-screen Chiyodas. A limited set of parameters are programmable in the older non-touchscreen versions of Chiyoda controls. The low level passworded machine parameters that control the personality of the bender are not programmable by Benderlink.)

3 It allows customers to use a PC disk / network to store all Chiyoda / KEINS parts off the control. (Bypassing the floppy drive.)


LICENSE TYPES

There are four license types. Each of these license levels allow you to custom-tailor your purchase with your application.

FULL Level 1 Communicate to manage file data for up to 99 benders.
FULL Level 2 Level 1 + EDIT bender data in Windows. This level includes the following additional software packages:
FULL Level 3 Levels 1 and 2 + enable CORRECTIONS LOOPS with measuring centers.
OFFLINE The Benderlink offline license allows engineers to program Benderlink from a location that are off-site or at a remote location. The only difference between the OFFLINE license and the FULL license is that the OFFLINE version of the software will not communicate with benders. Typically offline license is used to save the data files to a shared network location. The full version of Benderlink that is connected to the bender can load the files created and saved with the offline version of Benderlink.

See the PDF data sheet section below for details.




PDF DataSheets

Blinkchiyoda datasheet.jpg

Download a Datasheet for Benderlink for Chiyoda

Download a DataSheet Benderlink Ethernet Module for Chiyoda

Blinkchikeins levels pdf thumb.jpg

Download a DataSheet that explains the License Levels in Benderlink for Chiyoda/KEINS.

REVISIONS

Blinkchilogo.jpg
October 22, 2008Revision: Benderlink for Chiyoda/Keins 5.93
May 29, 2008Revision: Benderlink for Chiyoda/Keins 5.92
May 6, 2008Revision: Benderlink for Chiyoda/Keins 5.91
May 2, 2008Revision: Benderlink for Chiyoda/Keins 5.90
March 14, 2008Revision: Benderlink for Chiyoda/Keins 5.88
February 26, 2008Revision: Benderlink for Chiyoda/Keins 5.87
December 19, 2007Revision: Benderlink for Chiyoda/Keins 5.86
December 3, 2007Revision: Benderlink for Chiyoda/Keins 5.85
July 30, 2007Revision: Benderlink for Chiyoda/Keins 5.84
June 1, 2007Revision: Benderlink for Chiyoda/Keins 5.82
February 12, 2007Revision: Benderlink for Chiyoda/Keins 5.72
February 4, 2007Revision: Benderlink for Chiyoda/Keins 5.71b



OTHER PAGES

  • About Chiyoda - See this page for control version information.