Vector Tube Data Center
Vector Laservision is typical software that runs on the Eaton Leonard Vector Tube Data Centers. In our opinion, Laservision software is one of the most logically-designed process for bi-directional communication. For example, it does not recall data from benders during corrections loops unless a correction is needed. Also, its user interface leads operators through the inspection process using a simple step by step process.
Vector Tube Data Centers include 10 current loop ports that communicate using the legacy Eaton Leonard communications protocol. We have electronics that connect directly to the current loop ports on Vector Tube Data Centers.
See the Benderlink Ethernet Module page for more information about our long-distance electronics.
Eaton Leonard Vector Tube Data Center and AddisonMckee Benders
Download an applications datasheet for the Eaton Leonard Vector Tube Data Center and AddisonMckee Benders.
These software packages can communicate with Laservision-based measuring centers:
- Benderlink for Addison
- Benderlink for BLM
- Benderlink for Chiyoda
- Benderlink for CNC Bender
- Benderlink for Crown
- Benderlink for Eaton Leonard
- Benderlink for FARO
- Benderlink for KEINS
- Benderlink for MiiC
- Benderlink for Pines
- Benderlink for CRIPPA
If you have questions or need support with your Laservision-based measuring center please contact Numalliance
+52 442 212 3651