VTube-STEP v2.9.17

From ATTWiki
Revision as of 02:34, 23 December 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 2.png

Revision 2.9.17

Release Date: December 21, 2018
Build: 28


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgNEW - Super fast AUTOBUILD PARAMETRIC Import of Solid Models

The new AUTOBUILD PARAMETRIC feature speeds up importing and calculating centerline and bender data parametrics by 5 times or more by automating the calculation process.

This commmand works on clean tube models.

Vts v2.9.17 Autobuild Parametric Screen Capture.png

Autobuild will automatically attempt to find the centerline from the imported STEP or IGES model. For Autobuild to work, it needs to follow these rules about the incoming model.

1 - The model should be a single clean tube.

2 - The model should formed as a segmented tube shape made up of cylinders and truncated-tori.

3 - Remove all other geometry first.

4 - The following are either handled or ignored:

 * Inner walls (used to determine the wall thickness)
 * End wall rings (ignored)
 * Non-surface data, like lines and points (ignored)

600px



Check.jpgFix - Synchronize Reversed XYZ Data in STEP and LASER

When you have STEP and LASER open at the same time on multiple screens, it is possible to reverse either screen's XYZ coordinates. This fix updates both screens correctly when you reverse the coordinates in either screen.

Vtl v2.9.16 STEPandLASER Reverse.png




Other Pages