VTube-STEP v2.9

Revision 2.9 Release Date: October 5, 2017 Latest Build: 35 Back to VTube-STEP Back to VTube-STEP Updates See also VTube-LASER Updates See also to VTube-LASER Download in updates the VTube-STEP Support Page

Build 33 - NEW: ASSEMBLY FEATURE ALLOWS MULTIPLE PARTS IN ONE VTUBE PROJECT

With the new Assembly button in the toolbar, you can import and work with an assembly of tubes into VTube-STEP. The Assembly Control window allows VTube to hold several parts in memory at the same time. The data in the user interface on the left is displayed when you select a part in the list in the Assembly Control. The row with the GREEN square represents the data shown in the menus on the left. Works for VTube-LASER Setup Too You can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - and can then be measured by VTube-LASER.

>

Other Pages

• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.