VTube-STEP v2.9

From ATTWiki
Revision as of 22:29, 4 October 2017 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 2.png

Revision 2.9

Release Date: October 4, 2017
Latest Build: 33

Vtube-step-1.87 screenimage.png



Contents


Check.jpg Build 33 - NEW: ASSEMBLY FEATURE ALLOWS MULTIPLE PARTS

With the new Assembly button in the toolbar, you can import and work with an assembly of tubes into VTube-STEP.

The Assembly Control window allows VTube to hold several parts in memory at the same time.

The data in the user interface on the left is displayed when you select a part in the list in the Assembly Control. The row with the GREEN square represents the data shown in the menus on the left.

Works with VTube-LASER

You can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - and can then be measured by VTube-LASER.

Vtube-step v2.9 mainscreen assemblycontrol2.png



>

Other Pages