Difference between revisions of "VTube-STEP v2.9"

From ATTWiki
Jump to: navigation, search
(25px BUILD 37 - NEW PART NUMBER EDIT BOX ABOVE THE LEFT MENUS)
(Edit Part in 3 Places)
Line 63: Line 63:
 
This arrangement allows you to see which part the MENU data represents without entering the Part Setup menu or Assembly window - epecially in part assemblies.
 
This arrangement allows you to see which part the MENU data represents without entering the Part Setup menu or Assembly window - epecially in part assemblies.
 
<br><br>
 
<br><br>
===Edit Part in 3 Places===
+
===Edit Part Number in 3 Places===
 
With this setup, you can see and edit the Part Number in three separate places.  When you change them in one place, they will change in the other two.
 
With this setup, you can see and edit the Part Number in three separate places.  When you change them in one place, they will change in the other two.
  

Revision as of 21:58, 5 October 2017

Vtube-step logo 2.png

Revision 2.9

Release Date: October 5, 2017
Latest Build: 35

Vtube-step-1.87 screenimage.png



Contents


Check.jpg Build 33 - NEW: ASSEMBLY FEATURE ALLOWS MULTIPLE PARTS IN ONE VTUBE PROJECT

With the new Assembly button in the toolbar, you can import and work with an assembly of tubes into VTube-STEP.

The Assembly Control window allows VTube to hold several parts in memory at the same time.

The data in the user interface on the left is displayed when you select a part in the list in the Assembly Control. The row with the GREEN square represents the data shown in the menus on the left.

Works with VTube-LASER Setup Too

You can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - and can then be measured by VTube-LASER.

Vtube-step v2.9 mainscreen assemblycontrol2.png



Check.jpg BUILD 37 - NEW PART NUMBER EDIT BOX ABOVE THE LEFT MENUS

This small change will make a big difference in usuability.

The PART NUMBER is displayed above every menu on the left side of the screen. It can also be edited. If you edit the part number here, then it changes automatically in the Part Setup menu and Assembly Control window.



Vtube-step v2.9 part number box above menus.png

Always See the Part Number

This arrangement allows you to see which part the MENU data represents without entering the Part Setup menu or Assembly window - epecially in part assemblies.

Edit Part Number in 3 Places

With this setup, you can see and edit the Part Number in three separate places. When you change them in one place, they will change in the other two.

Vtube-step v2.9 partnumber three places.png



Check.jpg BUILD 37 - 26 NEW USER INTERFACE SKINS

Now VTube has 26 NEW user interface skins (rather than just 4 in previous versions).

Set the skins in the System Options menu.

Vtube skinmenu.png

Vtube officeblue skin.png

Vtube ubuntu skin.png



Check.jpg Build 37 - NEW: IMPORT MULTIPLE SOLID EDGE OR SUPRAVISION FILES

Import multiple SOLID EDGE or SUPRAVISION files at one time into an ASSEMBLY.

Vtube v2.9 import multiple files.png



Check.jpg Build 37 - NEW: CONTROL and FUNCTION Keys Work From Within Floating Control Windows

In previous versions of VTube, when floating control windows were displayed, it was necessary to click on the blue viewport before pressing any of the VTube short-cut keys for the keys to have any effect. Example short-cut keys are F2 for REDRAW or F3 for ZOOM ALL.

Now you can press the short-cut keys from within any of the floating windows.

Vtube-step v2.9 floating control windows.png




Check.jpg Build 1 - NEW: GRAPHICS ENGINE with NEW TRIHEDRON

The solid modeling engine was updated with subtle changes. For example, the trihedron is now a 3D solid model rather than the older stick figure.

Vtube v2.9 new trihedron.png




Check.jpg Build 37 - NEW: IMPORT SOLID EDGE XPRESROUTE FILES WITH XYZ or LRA DATA

Previous versions of VTube could only import XpresRoute files that contained LRA bender data.

Now VTube can import different kinds of XpresRoute files - either centerline XYZ or LRA bender data.

Vtube v2.9 solidedge xpresroute.png




Check.jpg OTHER CHANGES

  • Now VTube has 30 user interface skins (rather than just 4).
  • Improved internal model handling
  • Memory leaks removed.



Vtube skinmenu.pngVtube officeblue skin.png
Vtube ubuntu skin.png



Other Pages