Difference between revisions of "VTube-LASER v2.9.2"

From ATTWiki
Jump to: navigation, search
(→‎25pxOther)
(→‎25pxOther)
Line 68: Line 68:
  
 
<td width=500>
 
<td width=500>
−
* You can now change items inside the System Options window and immediately save them as part of the default project setup inside System Option. (In previous versions, it was necessary to exit System Options then re-enter before saving the default project.)
+
* A bug was discovered for saving the Default Project file where some of values recently changed would not be stored in the default setup. '''This is fixed.'''
 
</td>
 
</td>
  

Revision as of 22:00, 1 December 2017

Vtube-laser logo 1.96.png


Revision 2.9.2 Build 104

Release Date: December 1, 2017

Vtube-laser v2.7 screenshot.png


Check.jpgFIXED and IMPROVED - Split Bend - Finding Surface Edges

As of version 2.9, the Split Bend logic would not find the exact outside of the apex of the surface diameters in 180-degree bends.

At best, the split bend centerline would be 0.020" off from the original.

In addition to the fix, the logic has been improved to be faster and more reliable than in any previous version.

Splitbend before fix.png

Splitbend after fix.png




Check.jpgFIXED and IMPROVED - Bend Profile Calculations

The same issues that affected the Split Bend logic also affected the Bend Profile logic.

This has been repaired in this version.

Bendprofile.png




Check.jpgOther

  • A bug was discovered for saving the Default Project file where some of values recently changed would not be stored in the default setup. This is fixed.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v2.9.2&oldid=36171"