VTube-LASER v2.9.16

From ATTWiki
Revision as of 13:36, 1 November 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.16

Release Date: October 19, 2018
Current Build: 2


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - Reverse XYZ Data and Reset Point Labels at the same time

VTube-LASER and STEP now allow for the centerline XYZ points and point labels to be reversed at the same time with a new feature in the XYZ popup menu.

Vtl v2.9.16 ReverseXYZandLabels.png



Check.jpgFix - Synchronize Reversed XYZ Data in STEP and LASER

When you have STEP and LASER open at the same time on multiple screens, it is possible to reverse either screen's XYZ coordinates. This fix updates both screens correctly when you reverse the coordinates in either screen.

Vtl v2.9.16 STEPandLASER Reverse.png



Check.jpgNew - Import the EL Premier TOOL setup to VTube-LASER Bender Setup

Using the current tool setup at the EL Premier is very helpful - so that you don't have to re-enter the values after a first-time send to the bender. So now you can recall just the tool setup from the Premier in order to keep the current tool setup.

Vts v2.9.16 ELToolImportFromPremier.png



Check.jpg Fix - Eaton Leonard Data Transfer to Additional Setup Window

We fixed a bug that prevented data that was recalled from the bender from being transferred to the Additional Data menu.

Vtl 2.9.16 bendersetup addtionalELdata.png



Check.jpg OTHER CHANGES





Other Pages