VTube-LASER v2.9.16

Revision 2.9.16 Release Date: October 19, 2018 Current Build: 2 Back to VTube-LASER Back to VTube-LASER Updates See also VTube-STEP Updates Download updates the Support Page

NEW - Reverse XYZ Data and Reset Point Labels at the same time

VTube-LASER and STEP now allow for the centerline XYZ points and point labels to be reversed at the same time with a new feature in the XYZ popup menu.

Fix - Synchronize Reversed XYZ Data in STEP and LASER

When you have STEP and LASER open at the same time on multiple screens, it is possible to reverse either screen's XYZ coordinates. This fix updates both screens correctly when you reverse the coordinates in either screen.

New - Import the EL Premier TOOL setup to VTube-LASER Bender Setup

Using the current tool setup at the EL Premier is very helpful - so that you don't have to re-enter the values after a first-time send to the bender. So now you can recall just the tool setup from the Premier in order to keep the current tool setup.

Fix - Eaton Leonard Data Transfer to Additional Setup Window

We fixed a bug that prevented data that was recalled from the bender from being transferred to the Additional Data menu.

Other Pages

• See VTube-LASER Addata ZModem Communications Protocol for more information.
• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature