VTube-LASER v2.9.12

From ATTWiki
Revision as of 23:42, 10 August 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.12

Release Date: August 13, 2018
Current Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW LRA POPUP MENU SPLITS ONE BEND INTO TWO

Use this to split a very sharp angled bend into to adjacent bends in preparation for SPLIT BEND measuring.

This is especially useful for when a bend angle throws an intersection point far from the tube and creates unreliable tangent deviation and bender correction data.

How to use:

1 - Select the bend to split in an LRA grid.

2 - Right click.
3 - Choose "Split Selected Bend into Two Bends"

4 - In the Bend Setup tab above the XYZ data, click on Split Bend.

5 - In the Split Bend window, set the straight (which is the same as the bend #) to Split Bend at Apex. (Watch the data compress in the LRA grid when you exit the window.)

Vtl v2.9.11 rectangular laser scan image.png



Check.jpg OTHER CHANGES

  • Fix - The End Length deviations were one iteration of the Best Fit loop behind the final value in the Tube Data Storage. This has been fixed so that the final end length values are correctly displayed in Tube Data Storage. (Other deviation data was already correctly stored.)



Other Pages