VTube-LASER v2.9.10

From ATTWiki
Revision as of 15:13, 29 June 2018 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.10

Release Date: July 1, 2018
Current Build: 7


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - HERBER Bender Corrections Support

We added and tested HERBER MES file correction support that allows VTube-LASER to correct HERBER benders through a network connection.

HerberSplash.png



Check.jpgNEW - VTUBE-STEP MODE AUTOMATIC NEGATIVE STRAIGHT FIX DURING PARAMETRIC REBUILD

(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.)

Models with a 180-degree or greater bend angles can often create a very small negative straight distance value. We've added this feature to allow you to detect and fix this situation automatically by injecting a value of zero where there are negative straights.

Pressing YES will change the shape of the part. However, if the negative straight is very small, then changing the shape will have no significance and will create a part that is close enough to the nominal to still be a good shape for use as MASTER data.

This feature also allows you to skip the fix by pressing "NO." If you do this, then you can still manually adjust the radii to smaller values after the rebuild. Of course, if you skip this fix, then VTube may have trouble generating the diameter - and may even generate and display a program error that you can usually bypass.

Vts v2.9.9 automatic negative straight fix at rebuild.png



Check.jpgFIX- CONSTRUCT TUBE FEATURE WORKS AGAIN

A customer discovered that the Construct Tube feature was not working in the previous version due to changes in the measuring code logic.

We fixed the broken code in this version.

Vtube-laer v2.9.9 constructfeature.png



Check.jpgFIX- VTUBE-STEP MODE COLLECTION SELECTION ISSUE

(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.)

We found issues with the collected objects in VTube-STEP mode.

  • For example, the selected collected object (see the orange object) would never delete from the screen - even if the operator selected it and pressed delete.

  • This issue could cause index errors in the Collection Features list memory displayed in the grid.

  • The Collection Features Grid would not update automatically after a delete of the models on the screen.

All of these issues have been fixed.

Vvts 2.9.9 collected object selection.png



Check.jpgOTHER CHANGES

  • VTube-LASER will stop a Construct Tube process with ROMER arms if the LASER mode is active. It will also issue a warning to turn the LASER off.

  • The laser stripe data is now displayed on the screen with lines between the points. This feature makes the stripes much easier to see on the screen.





Other Pages