Difference between revisions of "How to Export a Supravision File"

From ATTWiki
Jump to: navigation, search
(STEP 1 - Enter Part Data in VTube)
(STEP 1 - Import Solid Models or Manually Enter Part Data in VTube)
Line 16: Line 16:
  
  
== STEP 1 - Import Solid Models or Manually Enter Part Data in VTube==
+
== STEP 1 - Import a Solid Model or Manually Enter Part Data in VTube==
  
 
<table>
 
<table>

Revision as of 22:10, 18 April 2016

Vtube-step logo 1.96.png

VTS2 SplashScreen.png



STEP 1 - Import a Solid Model or Manually Enter Part Data in VTube

You can enter centerline coordinates, bender data, or import data using one of the import formats - like import a STEP model of a tube.

Some imports require further processing before you output to Supravision. For example, you need to use the collect process on STEP and IGES models - which is like measuring the tube with a mouse. Then you can calculate the centerline coordinates.

Before you can export Supravison data, you must have data in the Tube Data menu describing the tube shape.

Vtube-step v2.5 model before tubedata.png

Vtube-step v2.5 tubedata.png


STEP 2 - Use the Import/Export Menu button in the Navigation Pane

Click on the Import/Export button in the Navigation Pane.

Now click on the EXPORT Supravision button in the EXPORT section of the menu.

Vtube-step v2.5 export supravision.png


About Supravision Files

Supravision files usually have a filename extension of $$$.

They are text files that contain part setup, XYZ, and LRA data usually.

They were used by Supravision software to save and load Supravision project files - so they contain a lot of data that VTube understands.

(Supravision software was retired a few years ago by ROMER. It was one of the standards in the industry for decades.)

Svwin.png


Other Pages