Difference between revisions of "End-Scan Using the Scissor Motion"

From ATTWiki
Jump to: navigation, search
(Why the End-Scan technique is important)
(Measure Setup)
Line 36: Line 36:
 
<td width=500>
 
<td width=500>
 
* Set System Options, Measure 2 Tab, "Maximum Number of LLP Points in String" to 3
 
* Set System Options, Measure 2 Tab, "Maximum Number of LLP Points in String" to 3
* Set Measure Setup - LASER Tab: The LASER defaults to ON for CYLINDERS and END-SCANS.<br><br>
+
* Set Measure Setup - LASER Tab: The LASER defaults to ON for CYLINDERS and END-SCANS.
 
* Set Measure Setup - LASER Tab Value: Cylinder stripes = 3 to 5
 
* Set Measure Setup - LASER Tab Value: Cylinder stripes = 3 to 5
 
* Set Measure Setup - LASER Tab Value: End-scan stripes = 5
 
* Set Measure Setup - LASER Tab Value: End-scan stripes = 5
 
* Set Measure Setup - LASER Tab Value: Split bend stripes = 5
 
* Set Measure Setup - LASER Tab Value: Split bend stripes = 5
* Set VTube-LASER so that the Scan Rates are set to TIMER for all scan types.<br><br>
+
* Set VTube-LASER so that the Scan Rates are set to TIMER for all scan types.
* Set VTube-LASER so that the Scan Rates TIMER is set to 0 for all TIMERS.<br><br>
+
* Set VTube-LASER so that the Scan Rates TIMER is set to 0 for all TIMERS.
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>

Revision as of 23:54, 28 January 2012

Vtube-laser logo.jpg How to perform quick scissor motion end-scans.

Vtube-laser 1 73.jpg


Why the End-Scan technique is important

This end-scan method is useful for ease-of-use and quickness.

Please keep in mind that our tests show that it is the least precise of the techniques that we recommend.

We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.


Measure Setup

  • Set System Options, Measure 2 Tab, "Maximum Number of LLP Points in String" to 3
  • Set Measure Setup - LASER Tab: The LASER defaults to ON for CYLINDERS and END-SCANS.
  • Set Measure Setup - LASER Tab Value: Cylinder stripes = 3 to 5
  • Set Measure Setup - LASER Tab Value: End-scan stripes = 5
  • Set Measure Setup - LASER Tab Value: Split bend stripes = 5
  • Set VTube-LASER so that the Scan Rates are set to TIMER for all scan types.
  • Set VTube-LASER so that the Scan Rates TIMER is set to 0 for all TIMERS.

How To Use This End-Scan Technique

  • Align the scanner with a slight scissor angle across the end as is shown in the image on the right

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithScissorCloseup.jpg

EndWithScissor.jpg




Other Pages