Difference between revisions of "End-Scan Using the Scissor Motion"

From ATTWiki
Jump to: navigation, search
(Other Pages)
(Other Pages)
Line 52: Line 52:
 
===Other Pages===
 
===Other Pages===
  
* Go to [[End-Scan Using the End Wall]]<br><br>
+
* See also [[End-Scan Using the End Wall]]
* Go to [[End-Scan Using End Targets]]<br><br>
+
* See also [[End-Scan Using End Targets]]
 
* Back to [[VTube-LASER]]
 
* Back to [[VTube-LASER]]

Revision as of 23:15, 28 January 2012

Vtube-laser logo.jpg How to perform quick scissor motion end-scans.

Vtube-laser 1 73.jpg


Why the End-Scan technique is important

This end-scan method is useful for ease-of-use and quickness.

Please keep in mind that our tests show that it is the least precise of the techniques that we recommend.

We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

  • Align the scanner with a slight scissor angle across the end as is shown in the image on the right

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithScissorCloseup.jpg

EndWithScissor.jpg




Other Pages