CNC Bender v12-20100316

From ATTWiki
Revision as of 12:48, 16 March 2010 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncv12procontrol withteachmode.jpg

Type of Upgrade: Minor Upgrade

Mandrel lube logic adjusted

V12mainmenu.jpg

Contents


Check.jpg NEW - Feed Speed Percentage Adjustment

This new bend option allows you to fine-tune the calculated feed speed during Feed Bending.

FeedSpeedPercentageAdjustmentOption.jpg

The value is entered as a percentage. For example "-10" means negative 10 percent. Negative values slow the calculated speed of the Feed axis.

Speed calculated at 100% (see vel0)
Processlist feedspeedadjustbefore.jpg

Same speed calculated at 90%(see vel0)
Processlist feedspeedadjustafter.jpg



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=CNC_Bender_v12-20100316&oldid=13691"