CNC Bender v11-20090729

From ATTWiki
Revision as of 20:04, 19 August 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncbender logo pushbending.png

Operatorstation model.jpg


Check.jpg REDESIGN - Hopper and Side Loaders Setup Simplified

  • The hopper and slide-loader setup is simplified by breaking the HOPPER enable/disable away from the SIDE LOADER.

  • The standard side-loader HSL1 is renamed to AL (AutoLoader).

  • Several new Low Level options (using a prefix of "AL") are added or renamed to ease the setup the AutoLoader with a hopper.

  • New AutoLoader and Hopper options in PreBend.

Cncbender AL dynamicoptions.jpg

Cncbender prebend autoloader features.jpg

Check.jpg NEW - Kicker Option in Low Level and PostBend

The new Kicker option allows for easy setup of a kicker actuator that kicks the part off the bender at the end of the bend cycle.

  • Set the Kicker COMDEF names in Low Level

  • Enable the Kicker in the PostBend section of Bender Data.

Cncbender kicker lowlevel.jpg

Cncbender kicker postbend.jpg

Check.jpg ENHANCED - Option Speed Edit Button

The option speed edit button now defaults to the UP (off) position whenever an option list loads to the screen.

Operators prefer that the button default state to be off during data REVIEW, but possibly ON during setup and editing.

Cncbender speededit.jpg

Other Pages