Difference between revisions of "Benderlink Ethernet Module for PINES to Vector"

From ATTWiki
Jump to: navigation, search
Line 1: Line 1:
[[image:Blinklines2vector_pdfimage.jpg|400px|right]]
+
[[image:Blinklines2vector_pdfimage.jpg|200px]]
 
+
[[image:Blink_module_vector_test2.jpg|400px]]
+
<br><br>
+
__TOC__
+
 
+
  
 
==Description==
 
==Description==

Revision as of 13:11, 2 May 2008

Blinklines2vector pdfimage.jpg

Contents

Description

This is a single port Benderlink Ethernet Module that works with Benderlink for Pines to connect a TS-2000 (Pines) control to an Eaton Leonard Vector 1 measuring center.

Productivity Benefits

100% Eaton Leonard Vector 1 Compatible. Any standard Vector 1 bender port can connect with this module.

Installation Location

It is placed near the Vector 1 Laservision measuring center.

About the Connections

  • One RJ-45 port - This connects to the Ethernet.
  • One Military Connector - This connector follows the legacy Eaton Leonard style connection. You can connect standard communications cable with circular connectors at either end.
  • One Power Port - Any voltage from 90 to 264 VAC accepted.



Inside the Module

This is an image of the inside of the module.

  • The Current Loop board is in the upper left corner.

  • The Ethernet Serial Device Server is the black box on the right.

  • The power supply is on the lower left.

Blink module vector test3.jpg

Example Installation


This is an image of the box installed on a test bench computer running Benderlink for Eaton Leonard, which simulates Vector 1 Laservision communications.

Blink module vector test1.jpg

Purchasing


This item can be purchased from our Online Store

Other Pages