Difference between revisions of "BendPro"
(→G2 Version) |
(→G2 Version) |
||
| Line 30: | Line 30: | ||
<td width=250> | <td width=250> | ||
The Supravision link is sold by [[Current Tech]] as an option. It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option.<br><br> | The Supravision link is sold by [[Current Tech]] as an option. It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option.<br><br> | ||
| − | [[image:bendpro-g2-utilities-menu-closeup.jpg|250px]] | + | [[image:bendpro-g2-utilities-menu-closeup.jpg|250px]]<br><br> |
| + | If you see the Measuring Machine Settings menu will allow you to enable the Supravision Client Interface, then your bender has communication capability. | ||
</td> | </td> | ||
<td> | <td> | ||
Revision as of 17:17, 20 March 2013
Contents |
BendPro is a popular bender software package used by multiple bender OEMs in the industry. There are two versions commonly used: G1 and G2
This is a BendPro G2 control on a Horn bender.
About BendPro Measuring Center Communications
BendPro uses Supravision Network communications as a standard for communications. Communications are straight-forward, efficient, and very fast.
The BendPro can be setup to communicate with:
- FARO ScanArms running our VTube-LASER software
- FARO arms using FARO CAM2 software using our Benderlink for FARO software
How to Check if Communications is Possible
G2 Version
|
The Supravision link is sold by Current Tech as an option. It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option. |
|
What Pines Technology will Need to Activate the Communications Feature
Pines Technology will need to send you a setup program to enable communications. They will ask for this information:
- Machine Serial Number
- Software Version Number
You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.
Other
- See also VTube-LASER
- See also Benderlink for FARO
