Difference between revisions of "BendPro"

From ATTWiki
Jump to: navigation, search
(G2 Version)
(G2 Version)
Line 33: Line 33:
 
</td>
 
</td>
 
<td>
 
<td>
[[image:bendpro-g2-utilities-menu.jpg|300px]]
+
[[image:bendpro-g2-utilities-menu.jpg|300px]]<br>
 +
[[image:bendpro-g2-measuringmachinesettings.jpg|300px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 17:16, 20 March 2013

BendPro-G2.jpg

Contents


BendPro is a popular bender software package used by multiple bender OEMs in the industry. There are two versions commonly used: G1 and G2

This is a BendPro G2 control on a Horn bender.

Bendpro-horn.jpg


About BendPro Measuring Center Communications

BendPro uses Supravision Network communications as a standard for communications. Communications are straight-forward, efficient, and very fast.

The BendPro can be setup to communicate with:


How to Check if Communications is Possible

G2 Version

The Supravision link is sold by Current Tech as an option. It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option.

Bendpro-g2-utilities-menu-closeup.jpg

Bendpro-g2-utilities-menu.jpg
Bendpro-g2-measuringmachinesettings.jpg

What Pines Technology will Need to Activate the Communications Feature

Pines Technology will need to send you a setup program to enable communications. They will ask for this information:

  1. Machine Serial Number
  2. Software Version Number

You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.


Other