CNC Bender v11-20091019

NEW - Select Push Bend Profile Window

A new Push Bend Profile selection menu makes selecting Push Bend Profiles much easier and more powerful. New Feature 1 Select the Push Bend Profile from the the actual Push Bend Profile Setup Window New Feature 2 Add a Push Bend Profile as you adding it to a Bend Option. New Feature 3 Adjust the Push Bend Profile from inside the Bend Option. New Feature 4 Clear the Push Bend Profile from the Bend Option.

NEW - Save Push Bend Data in Part Files

Push Bend Profile data is now saved inside the part files. This allows the data built up for this part to follow the part file.

NEW - Bend Axis PID Insert Mode (Low Level)

The new Bend Axis PID Insert Mode controls if the PID Tuning COMDEFs are inserted into the processlist.

NEW - Spacebar Filter Mode (Low Level)

Pressing the spacebar in Windows causes any focused button to "click." This can cause manual jog moves with the press of the spacebar. Some users prefer that this Windows feature be disabled for better safety. This version of CNC Bender has a new Spacebar Filter Mode in Low Level that, by default, will prevent the "clicking" of any buttons or controls in CNC Bender software using the spacebar. The exceptions are: When CNC Bender is in the Low Level menu. When the CNC Bender numeric keypad is active.

NEW - Notes Included in General Section of Reports

Customers have asked us to display the note data from the General Setup in all report. So now this data is automatically included in any CNC Bender report that displays the General section. The notes display is included in the Load Part File and Load Tool File menus. Click on the image to see a closeup.

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender General Information
• See Absolute Rotate
• See Absolute Rotate Offset Position
• See Final Feed Clearance
• See Mandrel Retract
• See Mandrel Retract Part Release