VTube-STEP v2.9
Revision 2.9Release Date: November 1, 2017
|
MAJOR NEW FEATURE: ASSEMBLY FEATURE ALLOWS MULTIPLE PARTS IN ONE VTUBE PROJECT
With the new Assembly button in the toolbar, you can import and work with an assembly of tubes into VTube-STEP. Works with VTube-LASER v2.9 Setup TooYou can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - and can then be measured by VTube-LASER. |
NEW UI FEATURE: ADDED PART NUMBER EDIT BOX ABOVE THE MENUS
This small change will make a big difference in usability.
|
Always See the Part NumberThis arrangement allows you to see and edit which part is being shown in the left menus without entering the Part Setup menu or Assembly window - epecially in part assemblies.
Edit Part Number in 3 PlacesWith this setup, you can see and edit the Part Number in three separate places. When you change them in one place, they will change in the other two. |
FIX: VTUBE NOW DRAWS DIAMETER EVEN WITH ZERO LENGTH STRAIGHTS
In previous versions, zero length straights would stop the diameter from drawing. |
NEW: IMPORT MULTIPLE SUPRAVISION FILES
VTube-STEP can now import multiple Supravision files.
|
NEW: IMPORT MULTIPLE SOLID EDGE FILES
Import multiple SOLID EDGE files at one time into an ASSEMBLY.
|
NEW: IMPORT VECTOR LASERVISION PRT FILES
VTube-STEP can now import Laservision PRT files:
|
ENHANCED IMPORT FEATURE: IMPROVED SOLID EDGE XPRESROUTE IMPORT
Previous versions of VTube could only import XpresRoute files that contained LRA bender data. |
NEW UI FEATURE: ADDED 26 NEW USER INTERFACE SKINS
Feature Added in Build: 37 |
NEW UI FEATURE: CONTROL and FUNCTION Keys Work From Within Floating Control Windows
Feature Added in Build: 37 In previous versions of VTube, when floating control windows were displayed, it was necessary to click on the blue viewport before pressing any of the VTube short-cut keys for the keys to have any effect. Example short-cut keys are F2 for REDRAW or F3 for ZOOM ALL. |
ENHANCED SOLID MODELING ENGINE
The solid modeling engine was updated. |
OTHER CHANGES
|
Other Pages
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.