CNC Bender v12.8
From ATTWiki
v12.8 - February 1, 2014
|
FIXED: Teach Mode and Custom Commands Issue Solved
Note: This fix applies only to bender with non-standard axis numbering for the Feed or Rotate axes (that does not match Feed = 1, Rotate = 2)</h>
Custom commands can be entered after every bend in the FRB page. SMT discovered a that FEED and ROTATE commands would not be completed properly when coming out of a custom move. |
</td> |
</td>
</tr>
</table>
|
The Option List panels now clear if all options are placed in the tool box. |
Other Changes
|
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender Customer Service Page for an update.
- See CNC Bender General Information
- See Teach Mode
- See Custom Commands