Difference between revisions of "VTube-LASER v2.9.12"
(→25pxNEW - LRA POPUP MENU SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION) |
(→Follow these steps to use with Split Bend Measuring) |
||
Line 52: | Line 52: | ||
<td width=300> | <td width=300> | ||
− | ===Follow these steps to | + | ===Follow these steps to setup VTube-LASER to split a bend then turn on "Split Bend Measuring"=== |
1 - Select the bend to split in an LRA grid.<br><br> | 1 - Select the bend to split in an LRA grid.<br><br> |
Revision as of 00:12, 11 August 2018
Revision 2.9.12Release Date: August 13, 2018
|
Contents |
NEW - LRA POPUP MENU SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION
This "split a bend" command is very useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data. |
Follow these steps to setup VTube-LASER to split a bend then turn on "Split Bend Measuring"1 - Select the bend to split in an LRA grid. See VTube-LASER Split Bend Feature for details on the Split Bend measuring feature. |
OTHER CHANGES
|
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature