Difference between revisions of "VTube-LASER v2.9.12"
(→25pxNEW - LRA POPUP MENU SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION) |
(→25pxNEW - LRA POPUP MENU SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION) |
||
Line 33: | Line 33: | ||
This is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.<br><br> | This is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.<br><br> | ||
− | + | After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to measure the bend angle inside and outside to overcome this problem.<br><br> | |
</td> | </td> | ||
Revision as of 00:07, 11 August 2018
Revision 2.9.12Release Date: August 13, 2018
|
Contents |
NEW - LRA POPUP MENU SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION
A customer problem gave us the idea to add a feature that allowed for splitting a very sharp-angled bend into two adjacent half-bends. This is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data. |
Follow these steps to use with Split Bend Measuring1 - Select the bend to split in an LRA grid. See VTube-LASER Split Bend Feature for details on the Split Bend measuring feature. |
OTHER CHANGES
|
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature