Difference between revisions of "End-Scan Technique Research"

Revision as of 23:59, 10 February 2012

End Scan Technique Research

@@ Line 22: / Line 22: @@
 * [[End-Scan Using the End Wall]]
 * [[End-Scan Using End Targets]]
-</td>
-<td width=300>
-</td>
-</tr>
-</table>
-===Measure Setup===
-<table cellpadding=10>
-<tr valign=top>
-<td width=500>
-* Set System Options, Measure 2 Tab, "Maximum Number of LLP Points in String" to 3
-* Set Measure Setup - LASER Tab: The LASER defaults to ON for CYLINDERS and END-SCANS.
-* Set Measure Setup - LASER Tab: Cylinder stripes = 3 to 5
-* Set Measure Setup - LASER Tab: End-scan stripes = 5
-* Set Measure Setup - LASER Tab: Split bend stripes = 5
-* Set Measure Setup = Scan Rates Tab: Set all rates to TIMER for all scan types.
-* Set Measure Setup = Scan Rates Tab: Set the Scan Rates TIMER is set to 0 for all TIMERS.
 </td>
 <td width=300>