Revision as of 13:02, 16 March 2010

Type of Upgrade: Feature Upgrade

New Bend option added

This new bend option allows you to fine-tune the calculated feed speed during Feed Bending.
Value Type	The value is entered as a floating point percentage.
+ or -	The value can be positive or negative.
Impact of Negative Values	Negative values slow the calculated speed of the Feed axis.
Example +	A value of +100 would double the speed of the Feed axis during draw bending.
Example -	A value of -100 would set the speed at 0 for the Feed axis during draw bending.
The table at the right shows an example of a -10% change in the processlist:	See vel0 calculated at 100%: See the same velocity with the option set to -10 (which represents 90% speed):

@@ Line 31: / Line 31: @@
 This new bend option allows you to fine-tune the calculated feed speed during Feed Bending.
 <br><br>
+</td>
+<td>
+[[image:FeedSpeedPercentageAdjustmentOption.jpg|400px]]
+</td>
+</tr>
-<table>
 <tr><td width=95>Value Type</td><td>The value is entered as a floating point percentage.</td></tr>
 <tr><td>+ or -</td><td>The value can be positive or negative.</td></tr>
@@ Line 38: / Line 42: @@
 <tr><td>Example +</td><td>A value of +100 would double the speed of the Feed axis during draw bending.</td></tr>
 <tr><td>Example -</td><td>A value of -100 would set the speed at 0 for the Feed axis during draw bending.</td></tr>
-</table>
-</td>
-<td>
-[[image:FeedSpeedPercentageAdjustmentOption.jpg|400px]]
-</td>
-</tr>

Difference between revisions of "CNC Bender v12-20100316"