Difference between revisions of "VTube-LASER v2.9.12"
(→25pxNEW - UNLIMITED NOTE LIST in PART SETUP) |
(→Revision 2.9.12) |
||
Line 6: | Line 6: | ||
==Revision 2.9.12== | ==Revision 2.9.12== | ||
− | Release Date: August | + | Release Date: August 16, 2018<br> |
− | Current Build: | + | Current Build: 5 |
* Back to [[VTube-LASER]] | * Back to [[VTube-LASER]] |
Revision as of 04:07, 17 August 2018
Revision 2.9.12Release Date: August 16, 2018
|
NEW - NOTE LIST in PART SETUP For an UNLIMITED Number of Notes in a VTube Project
We received a request for more COMMENT and/or NOTE fields in Part Setup for VTube-LASER and VTube-STEP.
|
NEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION
Splitting a bend into two adjacent half-bends manually is a bit complex. So we added this command to make it easy.
|
Follow these steps to setup VTube-LASER to split a bend then turn on "Split Bend Measuring"1 - Select the bend to split in an LRA grid. See VTube-LASER Split Bend Feature for details on the Split Bend measuring feature. |
NEW - MINIMUM CLAMP LENGTH FILTER FOR CORRECTIONS
This new filter is in the new CORRECTION FILTER tab menu in Bender Setup. When the filter limits the length reduction, then a dialog will appear before data is sent to the bender. The dialog will warn you with a message that at least one length correction was limited to the minimum clamp length. |
|
When the Minimum Clamp filter is active and the filter lengthened a length between two bends, then this warning will display. |
OTHER CHANGES
Other Pages
|