Difference between revisions of "VTube-STEP v2.9"
(→Works with VTube-LASER) |
(→Works with VTube-LASER) |
||
| Line 32: | Line 32: | ||
===Works with VTube-LASER=== | ===Works with VTube-LASER=== | ||
| − | You can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - '''and can be measured by VTube-LASER.''' | + | You can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - '''and can then be measured by VTube-LASER.''' |
</td> | </td> | ||
<td> | <td> | ||
Revision as of 22:28, 4 October 2017
|
Revision 2.9Release Date: October 4, 2017
|
|
Contents |
Build 33 - NEW: ASSEMBLY FEATURE ALLOWS MULTIPLE PARTS
|
Now you can import and work with an assembly of tubes into VTube-STEP. Works with VTube-LASERYou can use this new capability to import and measure any tube or even cylinder on an assembly. Any cylinder, square, or rectangle can be included in the assembly in VTube-STEP - and then transferred to VTube-LASER for measuring. If you look closely at the image on the right, you will see that the end flange and holes have been selected - and can then be measured by VTube-LASER. |
|
>
Other Pages
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
