VTube-LASER v2.9.18
Revision 2.9.18Release Date: March 8, 2019
|
NEW - AUTOMATIC LASER SEPARATION Method for UniScan Mode
The NEW AUTOMATIC LASER SEPARATION method allows VTube-LASER to automatically control the UniScan separation distance between laser stripes based on the known MASTER tube length. See the VTube-LASER UniScan Automatic Laser Separation Tutorial for more information. |
NEW - Bender Setup Window DATA CORRECTION MAPPING Adds Flexibility to Corrections
Use correction mapping in Bender Setup to move corrections up or down columns and to ignore specific corrections.
|
NEW - BLM CMM Communications Protocol
This protocol allows you to correct BLM benders using the BLM CMM protocol. This is now the recommended protocol for use with BLM benders. |
NEW - COMCO CSV Communications Protocol
This protocol allows you to correct COMCO benders through the CSV file import and export. |
NEW - OMCG SVNET Communications Protocol
This protocol allows you to correct OMCG benders. |
NEW - Now VTube has THREE Default Radii
Radius 1, Radius 2, and Radius 3 are now available in Part Setup. |
FIX - The Taskbar Icon Now Displays
VTube-LASER users discovered that the taskbar icon did not always display. This has been fixed. |
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature