Software Updates
CNC Bender - First Quarter - 2018
February 9, 2018 |
CNC Bender v15.10.1 |
- Faster Axis Enables and Disables
- Quick Safety Mat then Renable now works without causing Galil to shutdown
- Boolean check for dynamic options now works in process lists without bombing CNC Processor
- Custom Unload no longer automatically returns the bend arm.
- Benderlink now can send one bend parts.
|
January 17, 2018 |
CNC Bender v15.9.7 |
POSTBEND CHUCK CLOSE SKIP is now separate and independent from PREBEND CHUCK CLOSE SKIP.
|
CNC Bender - Third Quarter - 2017
September 16, 2017 |
CNC Bender v15.9.5 |
HUGE reductions in cycle times for customers that use CUSTOM COMMANDS. We added Activate End Custom Commands feature to skip unused Custom Commands in the Process List
|
CNC Bender - First Quarter - 2017
May 15, 2017 |
CNC Bender v15.9.1 |
Made more hard-coded CIO output names into configurable namesn for flexibility.
|
February 25, 2017 |
CNC Bender v15.1 |
Fixed Pressure Die Assist RVG (Realtime Variable Gearing) for Galil, Added a Tube Support 2., Fixed long pause when entering the TubeShape menu.
|
December 16, 2016 |
CNC Bender v15 |
Screen 16:9 aspect ratio compatibility |
CNC Bender - First Quarter - 2016
March 22, 2016 |
CNC Bender v14.9-r11 |
Direct axis jogs improvement, Parts path issue fixed, user interface fix. |
March 10, 2016 |
CNC Bender v14.9-r10 |
Benderlink change for ROMER software communications, carriage cross slide check enhancements |
January 22, 2016 |
CNC Bender v14.9-r9 |
Enhancements mostly to the TEACH mode. |
January 11, 2016 |
CNC Bender v14.9-r8 |
Fix to problem autobuilding with slightly negative numbers in Motion Commands |
CNC Bender - Third Quarter - 2015
September 1, 2015 |
CNC Bender v14.9 |
New Mandrel Support feature - to support the mandrel rod behind the carriage |
August 11, 2015 |
CNC Bender v14.8 |
Extra clamp opens before Pressue Die Return with Timer, Test Bend changes |
July 24, 2015 |
CNC Bender v14.7 |
Custom All Dies Open option is added to the Bend options. |
CNC Bender - Second Quarter - 2015
CNC Bender - Third Quarter - 2014
August 25, 2014 |
CNC Bender v12.12 |
The machine lube feature in CNC Processor can now use an input LOW as active. The feature will now also stop if it is active and the E-Stop is pressed. |
July 16, 2014 |
CNC Bender v12.11 |
Tool page no longer clears when Tube Shape data is cleared in FRB page, new radius shift away option during part release, fixed crash bug when editing custom commands |
CNC Bender - First Quarter - 2014
February 25, 2014 |
CNC Bender v12.8 |
The custom commands motion handling is repaired. Option panels clear if no options are in the options list. The Enable button for options no longer disappears when switching options. |
January 20, 2014 |
CNC Bender v12.7 |
Bend arm can return while carriage moves to start position |
January 2, 2014 |
CNC Bender v12.6 |
Password protected options |
CNC Bender - Third Quarter - 2013
October 7, 2013 |
CNC Bender v12.4 |
Benderlink enhanced, CNC Processor gives servo modules more time between commands, Skip Run fixed |
October 3, 2013 |
CNC Bender v12.3 |
Pulldown box fix in keyboard, added timeout for controlled jogs even when the bender is in CYCLE HOLD, spelling error fix in "could not save" dialog |
September 27, 2013 |
CNC Bender v12.2 |
New FEED and PDA motion geared to Bend arm axis |
August 30, 2013 |
CNC Bender v12.1.2 |
Motion recovery logic adjusted |
August 26, 2013 |
CNC Bender v12.1.1 |
FRB Clear repairs, Cycle Hold PDA Output Stop |
August 5, 2013 |
CNC Bender v12-20130805 |
Swing-away wiper logic enhanced |
July 24, 2013 |
CNC Bender v12-20130724 |
CNC Bender now allows press Auto mode or any manual mode in CYCLE HOLD, then press CYCLE START |
July 23, 2013 |
CNC Bender v12-20130723 |
Commands (COMDEFS) can be taught to skip CYCLE HOLD. |
July 10, 2013 |
CNC Bender v12-20130710 |
Added "Skip Step Tolerance" to main.axislist, added bend arm return to zero after run buttons |
July 3, 2013 |
CNC Bender v12-20130703 |
Fixed password protected Notes fields |
CNC Bender - Second Quarter - 2013
April 8, 2013 |
CNC Bender v12-20130408 |
Adjusted Manual Page user interface to make buttons more organized. They now only appear when their features are activated. |
CNC Bender - First Quarter - 2013
January 31, 2013 |
CNC Bender v12-20130131 |
Adjusted Manual Page user interface to make Direct Axis jog button line up with other controls. |
January 25, 2013 |
CNC Bender v12-20130125 |
Fixed Logic: The Prebend Custom Command is now loaded from the CNC Bender part files. |
CNC Bender - Fourth Quarter - 2012
September 19, 2012 |
CNC Bender v12-20120919 |
Communications logic adjusted for new Windows version of Vector-LASERVISION. New Jog Queue Windows location |
CNC Bender - Third Quarter - 2012
July 28, 2012 |
CNC Bender v12-20120728 |
Implemented a stronger HALT in CNC Processor to be sure motion commands are halted during E-Stop. |
July 7, 2012 |
CNC Bender v12-20120707 |
Set bend acceleration and deceleration with Manual incremental and absolute moves. |
CNC Bender - Second Quarter - 2012
CNC Bender - Fourth Quarter - 2011
December 22, 2011 |
CNC Bender v12-20111222 |
New Pressure Die SERVO axis gives very precise pressure die capture positions. |
December 15, 2011 |
CNC Bender v12-20111215 |
New communications with GE-Fanuc robot to send current part running in Auto mode. More control in Prebend over Rotate axis seam/scribe/hole detect. |
November 30, 2011 |
CNC Bender v12-20111130 |
Repairs to Test Bend mode with PDA motion. Hold carriage in position after arriving at the LOAD position. Tube Support works properly during homing. |
November 20, 2011 |
CNC Bender v12-20111120 |
XYZ to FRB calculation for linear distances repaired, extra horizontal clamp die close change to work with all die close modes. |
November 01, 2011 |
CNC Bender v12-20111101 |
Boost bender feature, Hines 800 bender features, pulse enable at halt, enable only to run |
CNC Bender - Second Quarter - 2011
CNC Bender - First Quarter - 2011
CNC Bender - Fourth Quarter - 2010
December 23, 2010 |
CNC Bender v12-20101223 |
Redesigned Run Page, Moved Step List to Diagnostic page |
November 16, 2010 |
CNC Bender v12-20101116 |
Absolute Pre-Rotate Delay added in Prebend options to allow the feed axis to move the chuck off the tube before rotating |
November 02, 2010 |
CNC Bender v12-20101102 |
Joystick-activated jog changes, new default jog speeds reset, teach mode dual jogs fixed |
October 26, 2010 |
CNC Bender v12-20101026 |
Logic fixes |
October 21, 2010 |
CNC Bender v12-20101021 |
Allow early mandrel extract on last bend, Added timer to PreEnable processlist, Removed restriction for keyboard functions in all windows except jog buttons |
October 05, 2010 |
CNC Bender v12-20101005 |
Enhancements for LOAD and START programming |
CNC Bender - Third Quarter - 2010
September 03, 2010 |
CNC Bender v12-20100903 |
CYCLE HOLD in Teach Mode, Require ENABLE Button for STEP and AUTO modes, Ramp-down Jogging, PDA Home Tolerance, New Jog Speeds |
August 27, 2010 |
CNC Bender v12-20100827 |
Run Buttons enhancements, new Feed Distance Adjust Percent in each Bend option |
August 20, 2010 |
CNC Bender v12-20100820 |
New vertical head-shift servo axis, new EDIT keyswitch, new embedded tube support handling, new Mandrel Lube timers, new friendly axis EOTs (End of Travels), Huge system optimization to reduce CPU usage. |
July 7, 2010 |
CNC Bender v12-20100707 |
All output modules use extended sustain time |
July 2, 2010 |
CNC Bender v12-20100702 |
CNC Bender joystick or teach pendant response now instant,
CNC Benderlink sends radii to the measuring center |
CNC Bender - Second Quarter - 2010
CNC Bender - First Quarter - 2010
March 30, 2010 |
CNC Bender v12-20100330 |
Hitch Feed Linear Distance Conversion |
March 24, 2010 |
CNC Bender v12-20100324 |
Machine Lube logic adjustment |
March 16, 2010 |
CNC Bender v12-20100316 |
New feature - Feed Speed Percentage Adjustment |
March 11, 2010 |
CNC Bender v12-20100311 |
Mandrel lube logic adjustment |
March 09, 2010 |
CNC Bender v12-20100309 |
Recapture logic adjustment |
March 04, 2010 |
CNC Bender v12-20100304 |
New: Clear ALL pages in the Tube Shape Data Menu |
March 03, 2010 |
CNC Bender v12-20100303 |
New built-in Benderlink menu with powerful edit features |
February 4, 2010 |
CNC Bender v12-20100204 |
Increased tolerance for PDA and bend arm interaction |
January 27, 2010 |
CNC Bender v12-20100127 |
Removed Low Level option visibility feature no longer needed |
January 15, 2010 |
CNC Bender v12-20100105 |
New v12 version with Teach Mode: Teach your bender any motion for difficult transitions between bends. |
CNC Bender - First Quarter - 2010 - v11
January 05, 2010 |
CNC Bender v11-20100105 |
Added new "Robot Clear" protection mode, Removed "energize dies" dialog at Cycle Start |
CNC Bender - Fourth Quarter - 2009
December 29, 2009 |
CNC Bender v11-20091229 |
Optimization for motion commands, mandrel-check and tube destroyer feature |
December 18, 2009 |
CNC Bender v11-20091218 |
Critical update for Feed accuracy when moving forward while bend arm is returning, optimizations |
December 01, 2009 |
CNC Bender v11-20091201 |
Overcoming Absolute move issues when near zero, Conditional Edge Trigger improvements allow for a single button to toggle states in CNC Bender |
November 23, 2009 |
CNC Bender v11-20091123 |
Support for Windows Vista, 7 (including 64 bit). Edit the new High Speed Constant Run Process List in Low Level, Improved error messages for missing process lists |
November 18, 2009 |
CNC Bender v11-20091118 |
Improvements for features from 20091104 version and 20090518 version |
November 12, 2009 |
CNC Bender v11-20091112 |
Added dedicated TIMEOUT for Wait for Not End Cycle |
November 4, 2009 |
CNC Bender v11-20091104 |
Optimizations aimed to trim 2 to 4 seconds off each part cycle |
October 22, 2009 |
CNC Bender v11-20091022 |
Push Bend Profile Setup NAME, PDA-RVG Profile Setup NAME, Keyboard Repair |
October 19, 2009 |
CNC Bender v11-20091019 |
Keyboard filtering, Automatic Adjust from Other Benders, Push Bend Profile Enhancements, PDA-RVG Profile Enhancements |
October 7, 2009 |
CNC Bender v11-20091007 |
Spacebar filtering, Reset Rotate Enable/Disable, PID Tuning On/Off |
CNC Bender - Third Quarter - 2009
September 28, 2009 |
CNC Bender v11-20090928 |
Absolute Rotate during Final Feed Clearance Move, New Mandrel Retract for Part Release |
September 23, 2009 |
CNC Bender v11-200900923 |
CNC Bender now shuts motor down even if in CYCLE HOLD, Optimized Absolute Rotate |
September 15, 2009 |
CNC Bender v11-200900915 |
Optimized Pressure Die commands based on low level setup plus enhancements. |
August 27, 2009 |
CNC Bender v11-20090827 |
Now secondary processes can use [CYCLEHOLD] to put benders in the hold state. |
August 26, 2009 |
CNC Bender v11-20090826 |
New "End Cycle" Mode can be switched by external processes |
August 19, 2009 |
CNC Bender v11-20090819 |
New set Manual, Step, or Auto Modes for Stack Lights |
July 29, 2009 |
CNC Bender v11-20090729 |
Refined Side Loader and Hopper options, New Kicker option |
July 1, 2009 |
CNC Bender v11-20090701 |
New FRB copy feature for serpentine parts |
CNC Bender - Second Quarter - 2009
June 26, 2009 |
CNC Bender v11-20090626 |
Tool page fix for toolbox, Single radius shifting fix |
June 09, 2009 |
CNC Bender v11-20090609 |
Seam Detect MODE, redesigned message window, new formula operators, new BEGIN timers, new PreEnable process list, new Automatic Chuck Close |
June 05, 2009 |
CNC Bender v11-20090605 |
Minor debug in repair of the horizontal shift [IF] logic |
May 28, 2009 |
CNC Bender v11-20090528 |
Minor debug in displaying proper units for calculation of XYZ to FRB |
May 18, 2009 |
CNC Bender v11-20090518 |
Minor debug allowing for AllDiesToClose After motion-controlled PDA return |
May 15, 2009 |
CNC Bender v11-20090515 |
Infinitely variable radius with twist, Make contiguous push bend profile sections to form complex part |
April 08, 2009 |
CNC Bender v11-20090408 |
The MANDREL is now controlled PER BEND (rather than OVERALL) |
CNC Bender - First Quarter - 2009
March 30, 2009 |
CNC Bender v11-20090330 |
Enhanced for Processlist Compiler - Optimized Radius Shifting Logic |
March 26, 2009 |
CNC Bender v11-20090326 |
Increased Flexibility: Changed "Feed Away From Dies" Logic to "Radius Shift Away", Moved from OVERALL options to RADIUS options |
March 20, 2009 |
CNC Bender v11-20090320 |
Enhanced for Processlist Compiler - Carriage Radius Level Logic |
February 10, 2009 |
CNC Bender v11-20090210 |
Fix for Processlist Compiler - PreCommand Commands |
January 26, 2009 |
CNC Bender v11-20090126 |
New Load and Save in Tool Page, Low Level Option Rewording for Clarification |
CNC Bender - Last Quarter - 2008
CNC Bender - Fall 2008
CNC Bender - September 2008
CNC Bender - Summer 2008
These versions are for horizontal draw-bending and horizontal push-bending.
CNC Bender - January-April 2008
April 15, 2008 | CNC Bender v10-20080415 |
April 10, 2008 | CNC Bender v10-20080410 |
April 7, 2008 | CNC Bender v10-20080407 |
March 29, 2008 | CNC Bender v10-20080329 |
March 19, 2008 | CNC Bender v10-20080319 |
February 26, 2008 | CNC Bender v10-20080226 |
February 19, 2008 | CNC Bender v10-20080219 |
February 14, 2008 | CNC Bender v10-20080214 |
February 7, 2008 | CNC Bender v10-20080207 |
January 8, 2008 | CNC Bender v10-20080108 |
CNC Bender - July-December 2007
December 17, 2007 | CNC Bender v10-20071217 |
November 20, 2007 | CNC Bender v10-20071120 |
October 30, 2007 | CNC Bender v10-20071030 |
October 3, 2007 | CNC Bender v10-20071003 |
September 28, 2007 | CNC Bender v10-20070928 |
September 20, 2007 | CNC Bender v10-20070920 |
September 14, 2007 | CNC Bender v10-20070914 |
August 28, 2007 | CNC Bender v10-20070828 |
August 3, 2007 | CNC Bender v10-20070803 |
July 26, 2007 | CNC Bender v10-20070726b |
July 11, 2007 | CNC Bender v10-20070711 |
July 5, 2007 | CNC Bender v10-20070705 |
July 2, 2007 | CNC Bender v10-20070702 |
As of July 2, 2007, the ProControl and LiteControl were combined into one development platform. All changes to one platform automatically effect the other platform
|
For ProControl Only
For Older LiteControl on 800x600 Screens
Other Pages
Back to CNC Bender page
See CNC Bender Upgrade Service page for details on our upgrade service for CNC Bender.