How to Switch the OD Mesh On/Off

From ATTWiki
Jump to: navigation, search

Tcadpro logo.jpg

Contents


Entities Described

The OD Mesh can be composed of two types of entities - either WIRE or SURFACE. Either can be switched on or off independently in TubeCAD. This page describes ways to control them.

Switch Straights Wire

Switch the straights WIRE mesh off in the straights by using the Primary Views>3D>Straights wire>On/Off

Tcadpro 3d straightwires off.jpg


Switch Arcs Wire

Switch the arcs WIRE mesh off in the straights by using the Primary Views>3D>Arcs wire>On/Off

Tcadpro 3d arcwires off.jpg

Switch Straights Faces

Switch the straights surface mesh off in the straights by using the Primary Views>3D>Straights faces>On/Off

Tcadpro 3d straightfaces off.jpg

Tcadpro 3d straightfaces off2.jpg

Switch Arcs Wire

Switch the arcs surface mesh off in the straights by using the Primary Views>3D>Arcs faces>On/Off

Tcadpro 3d arcfaces off.jpg

Tcadpro 3d arcfaces off2.jpg

Switch Between Surface and Outline Quickly

You can switch between surface and outline display quickly by pressing on the right toolbar button with the surface mesh.

Tcadpro surface outline switch button.jpg

Tcadpro surface.jpg

Tcadpro outline.jpg

Other Pages

Go back to TubeCAD Pro