VTube-STEP v2.9.18

From ATTWiki
Revision as of 20:10, 13 March 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 2.png

Version 2.9.18

Release Date: March 12, 2019
Build: 18


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgSelection Inversion Added

Selection inversion makes selecting parts from inside an assembly much easier.



Check.jpgNEW - OMCG SVNET Communications Protocol

This protocol allows you to correct OMCG benders.

See VTube OMCG Bender Correction for details.

Vts v2.9.18 BenderSetup OMCGSVNET.png



Check.jpgNEW - Now VTube has THREE Default Radii

Radius 1, Radius 2, and Radius 3 are now available in Part Setup.

Vtl v2.9.18 DefaultRadius123.png



Check.jpgFIX - The Taskbar Icon Now Displays

VTube-S users discovered that the taskbar icon did not always display. This has been fixed.

Vtl v2.9.18 TaskbarIcon.png



Check.jpgOther Changes

  • NEW - A new button in Tube Data Storage allows you to copy only the MEASURED back into main memory.

  • NEW - Autobuild Parametrics now calculates the CUT LENGTH automatically in VTube-STEP.

  • NEW - (STEP MODE) Selection Inversion - Allows you to select a tube, then invert the selection to delete all parts of the assembly except for the selected tube. Then use Autobuild Parametrics on the remaining tube.




Other Pages