Difference between revisions of "VTube-STEP v2.9.12"

From ATTWiki
Jump to: navigation, search
(25pxNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION)
(25pxNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION)
Line 94: Line 94:
 
</table>
 
</table>
 
<br><br>
 
<br><br>
 +
 +
 +
==[[image:Check.jpg|25px]]OTHER CHANGES ==
 +
 +
* FIX - The Coping Print Preview screen does not load unless it is being used. This prevents potential errors if no printer is installed in your setup.<br><br>
 +
* CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts.
  
 
=Other Pages=
 
=Other Pages=

Revision as of 22:13, 20 August 2018

Vtube-step logo 2.png

Revision 2.9.12

Release Date: August 16, 2018
Build: 5


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgNEW - NOTE LIST in PART SETUP For an UNLIMITED Number of Notes in a VTube Project

We received a request for more COMMENT and/or NOTE fields in Part Setup for VTube-LASER and VTube-STEP.

We added the new UNLIMITED NOTE LIST - which allows for any number of notes per project.

  • All the notes can be exported in the BATCH EXPORT mode in the Report menu.

  • All the notes can be included in a standard report.

  • The notes are stored in the VTube project file.


Vtl v2.9.12 notelist STEP.png





Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature

This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.

Vtl v2.9.12 notelist video.png



Check.jpgNEW - LRA POPUP MENU COMMAND SPLITS ONE BEND INTO TWO FOR MORE ACCURATE MEASURING QUALIFICATION and BENDER CORRECTION

NOTE: This feature is provided mainly for VTube-LASER measuring. But it can also be used in VTube-STEP in preparation for VTube-LASER measuring.

Splitting a bend into two adjacent half-bends manually is a bit complex. So we added this command to make it easy.

This new "split a bend" command is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.

After splitting a bend into two adjacent half-bends, you can use the SPLIT BEND measuring feature to scan the inside and outside of the actual bend to overcome this problem.

This new command is available in these grids:

  • Incremental LRA
  • Springback Compensated LRA
  • Absolute LRA

Vtl v2.9.12 splitbend into twobends.png




Check.jpgOTHER CHANGES

  • FIX - The Coping Print Preview screen does not load unless it is being used. This prevents potential errors if no printer is installed in your setup.

  • CHANGE - Moved the demo parts to the "C:\Users\Public\Documents\VTube\Demo Files" folder during installation to clear up the default project folder for your parts.

Other Pages