VTube-STEP v2.8

From ATTWiki
Revision as of 21:37, 21 April 2017 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 2.png

Revision 2.8

Vtube-step-1.87 screenimage.png

Contents



Check.jpg NEW: UNEND Tube Around ANY STRAIGHT

Previous versions would only unbend around straight 1. Now we allow you to anchor the unbending in any straight with this feature.

Click on the image below to see a video of how this works.

Vtube-step v2.8 unbending with anchor straights video.png


Vtube-step v2.8 unbend anchor straight.png

SMT dedicated power bender.png



Check.jpg NEW: TRUE VIEW ORBIT CONTROL Window

This window lets you find any true or normal orientation for any line or bend in any model.

Click on the image below to see a video of how this works.

(Note that the video shows VTube-LASER. The feature is the nearly the same for both STEP and LASER mode - except there is only a MASTER tube in STEP mode):

Vtube-laser v2.8 orbitcontrolwindow video.png

Vtube-step v2.8 trueview orbit control.png



Check.jpg NEW: TRUE VIEW TRANSFORM Window

This window lets you transform the orientation of any bend to true to the XY plane. You can also transform the tube so that any straight is aligned with the X, Y, or Z axes.

This is different than changing the orbit - which just rotates around the part. This actually rotates the part to the XY plane by changing the part centerline coordinates.

Vtube-step v2.8 trueview transform.png



Other Pages