VTube-STEP v2.5

From ATTWiki
Revision as of 11:13, 18 April 2016 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo 2.png

Revision 2.5

Vtube-step-1.87 screenimage.png

Contents




Check.jpg NEW: Project File Save Notification Proves the Project Was Saved

Vtube v2.5 savedfilewindow alone.png

Previous versions of VTube were quiet when you saved a project file. That made some of our customers understandably nervous.

So now VTube always shows a quick notification at the top of the screen when you save a project file.

The window displays for a few seconds then disappears automatically. But you can even keep working when this window is open because you can click on other parts of VTube even while this notification is on the screen.

Vtube v2.5 savedfilewindow.png



Check.jpg NEW: HOT Keys Control-L (Load) and Control-S (Save) for VTube Project Files

These new hotkeys are a simple thing- but they'll make your life much easier if you're a hotkey user.

Try it. Press CTRL-L to load a project file, then CTRL-S to quickly save it again. It's about as easy as it gets.

(The new project save notification window described above will display every time you press CTRL-S.)

VTube Ctrl-S Ctrl-L.png



Check.jpg FIX: Transfluid XYZ Output (BKT File) Repairs

This feature allows you to output new XYZ data to the bender from inside VTube-STEP (which is part of VTube-LASER).

The output engine for Transfluid XYZ data was updated and repaired from errors we found that would stop the export.

Also, the linear units are now converted to whatever the current linear unit is in the VTube user interface. This was added because the internal Transfluid data can be either inches or millimeters.

Vtube-laser-transfluid communication.jpg



Other