VTube-STEP v2

From ATTWiki
Revision as of 22:16, 16 February 2015 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo.jpg

Revision 2.0

Vtube-step-1.87 screenimage.png





Check.jpg NEW: Path Manager

This change to VTube is a huge time-saver. Customers that have tested this feature report that they are very happy it.

The new Path Manager allows you to store and recall complex file paths from VTube without having to constantly drill down into folders and paths.

The window displays when you open projects and perform imports. It also opens when you perform a Save As project.

Vtube-step-2 screenimage closeup 2.png

Check.jpg FIXED: Ball Probe Issue

We fixed a ball probe measurement issue where VTube would sometimes not always seem to take in the single points from the FARO driver.

This issue created problems with measuring cut planes too. If you measured cut planes, and still couldn't get the cut plane to work properly, then it was probably due to this issue.

Check.jpg ENHANCED: CSM and ALPINE Conversions

  • The CSM and Alpine conversions now correctly invert the rotation value in both M3 and M4 controls.
  • Other adjustments to the conversion were tested and refined.

Other