Difference between revisions of "VTube-STEP v1.84"

From ATTWiki
Jump to: navigation, search
(→‎25px NEW: CONRAC Style Bender Chart)
(→‎25px Other Changes)
Line 62: Line 62:
 
<td width=400>
 
<td width=400>
 
   
 
   
−
* VTube now always reports reduced arc lengths compensated for elongation if the elongation percentage is greater than 0.  (It used to always report the theoretical value without elongation.)<br><br>
 
  
−
* VTube no longer refreshes the tube model on the screen when a project is saved.  This saves significant amount of time for large models.<br><br>
 
−
 
−
* The model refresh time is optimized significantly - especially when the point labels are switched on.<br><br>
 
−
 
−
* Repairs were made to the Language Editor.<br><br>
 
−
 
−
* Internal were made repairs to the Part Setup grid.  Corrections were made to field types.<br><br>
 
−
 
−
* Click on column cell 1 of the Default Radius field to show the Radius Table.<br><br> 
 
  
 
</td>
 
</td>

Revision as of 18:52, 27 November 2013

Vtube-step logo.jpg

Revision 1.84

Vtube-step-1.83 screen.png




Check.jpg NEW: Export to Alpine M4 MBF Data File

VTube can now export XYZ data to an Alpine M4 data file. This feature sends XYZ coordinates for setup.

Vtube-step 1.84-exportAlpineM4.png

The extended export feature lets you set the radius level before sending the data to the bender.


VTube-Step-1.84 AlpineExportMenu.png

Vtube-step-1.84 AlpineM4ExtendedXYZValues.png

Check.jpg ENHANCED: SolidWorks Builder

The SolidWorks tube builder can now:

  • Build constrained end and intersection points in 3DSketch.

  • Build constrained centerline geometry in 3DSketch.

Vtube-step-1.84 buildsolidworks.png

Vtube-step-1.84 solidworks part.png



Check.jpg Other Changes



Other

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-STEP_v1.84&oldid=23365"