Difference between revisions of "VTube-STEP v1.79"

From ATTWiki
Jump to: navigation, search
Line 10: Line 10:
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>
[[image:Vtube-laser_1.78.jpg|300px]]
+
[[image:Vtube-step_1.79.jpg|300px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 03:34, 17 November 2012

Vtube-step logo.jpg

Revision 1.79

Vtube-step 1.79.jpg



Transfer Tubes to CAM2 Measure 10

  • Enter the tube data in VTube - or scan the tube with the FARO, then save CAM2 Measure 10 tube data for import into CAM2.
  • Save the MASTER or the MEASURED.
  • Save using a Popup menu in the XYZ grid, or save from the the File tab.



Added Split Bend collection feature in Collect Control in STEP mode

  • Split bend (for handling 180 degree bends or greater) was available in LASER mode - now it is available in STEP mode too.
  • This means that you can also display compress LRA data with two 90s being combined to show a 180 degree bend in the LRA grid and the reports.
  • In STEP mode, you can select an arc section that* becomes the guide for the intrados and extrados - showing VTube where to form the split bend centerline.
  • The split construction model now displays in STEP mode.

Vtube-step splitbend constructionmodel.jpg


Added new Radius Table in XYZ pop-up grid for storage of often-used radii

  • Store commonly used radii in a table for use in the future.
  • Any number can be added to the list.
  • VTube can now output TRUE radius as well as NOMINAL radius values based on the radius table.

Vtube radius table popup.jpg Vtube radius table.jpg

Other Changes

  • Fixed slow dragging control windows in STEP mode The End Scan Diameter
  • Qualification Tolerance value is now in the Measure Setup menu of LASER mode
  • The Maximum Number of Points Allowed in Cylinder Laser Stripe value is moved to the Measure Setup menu of LASER mode
  • The Spin Edit controls in the Measure Setup can now be manually set with the keyboard.
  • Faster saving and loading of VTube-LASER persistence files makes VTube load and close faster
  • New options in XYZ pop-up menus
  • The formula for building the centerline in the split bend area is improved and more reliable.



Other Pages