Difference between revisions of "VTube-STEP and VTube-LASER Project File Compatibility"

From ATTWiki
Jump to: navigation, search
(All VTube License Levels Have 100% Compatible Project Files)
(About VTube-LASER Programmer)
Line 34: Line 34:
 
<br>
 
<br>
  
== About VTube-LASER Programmer==
+
== About the VTube-LASER Programmer License==
  
 
<table>
 
<table>
Line 51: Line 51:
 
<br>
 
<br>
  
 +
 +
== File Compatibility with Older and Newer Versions==
 +
 +
<table>
 +
<tr>
 +
<td width=300>
 +
All newer versions of VTube can load the project files from any<br><br>
 +
</td>
 +
<td>
 +
</td>
 +
</tr>
 +
<tr>
 +
</table>
 +
<br>
  
 
==Other Pages==
 
==Other Pages==

Revision as of 18:04, 24 February 2016

Vtube-step logo 1.96.png Vtube-laser logo 1.96.png

VTS2 SplashScreen.png
Vtl screen hd scanner without logo.png



All VTube License Levels Have 100% Compatible Project Files

VTube-STEP and VTube-LASER save project files that are 100% compatible with each other.

For example, anyone who runs VTube-STEP can setup and save a VTube Project file (.vtp) that can be loaded in VTube-STEP or even VTube-LASER at other locations.

Customers use this capability to enter data in locations that are not near the arm, then save the project files to a network location. When FARO operator needs to measure the part as defined in the VTP file, then he/she loads the part from the network location into VTube-LASER.


About the VTube-LASER Programmer License

You can setup a VTube-LASER project in VTube-STEP. However, some customers also want to control the LASER setup variables that are not available in STEP mode. So they purchase VTube-LASER Programmer to do this away from the FARO arm.

The VTube-LASER PROGRAMMER version is identical to VTube-LASER except that it cannot connect to a FARO arm to measure parts.



File Compatibility with Older and Newer Versions

All newer versions of VTube can load the project files from any


Other Pages