Revision 2.9.9

Release Date: June 11, 2018
Current Build: 1

• Back to VTube-LASER
• Back to VTube-LASER Updates
• See also VTube-STEP Updates
• Download updates the Support Page

The new STRIPE CUT PLANE feature is included in the CUT PLANE CONTROL Window.

It will automatically remove entire stripes that are captured too far from the stripe nearest the probe. The goal is to ensure that the scanner does not accidentally catch any object in a stripe that is far away from the probe.

This is necessary for small parts because the scanners have an active depth range that allows them to pick up stripes that are within a 5 inch range.

SCP works with the DCP feature to ensure that no stray data is used in a scan like this:

1. - The CUT PLANE feature removes any surface data found below standard cut planes that are active.
   
   
2. - The DCP (DIAMETER CUT PLANE) feature removes the tails of stripes.
   
   
3. - The SCP (STRIPE CUT PLANE) feature then removes any stripe remaining that is too far from the probe.
   
   

We discovered that the MTA feature would record all the tubes and build he average in Tube Data Storage, but would not copy it into main memory.

This has been fixed.

The offset values are the same as the old Supravision "tangent" end points in the Critical Reports section of the Inspection Data report.

The new tokens for this data are:

• A-EndOffset
• B-EndOffset

• The Split Bend calculations in STEP mode are improved from previous versions.
  
  
• The Split Bends are set to ACTIVE automatically when importing Split Bends.

The floating windows have some enhancements in this version that ensures that they stay on top of parent windows.

• The part number is automatically inserted in the "Displayed in UI" box above the menus when a CAD model is imported.
  
  
• The internal configuration engine was updated in order to solve some minor configuration file issues.