Difference between revisions of "VTube-LASER v2.9.8"

From ATTWiki
Jump to: navigation, search
(25pxOTHER CHANGES)
Line 146: Line 146:
  
 
<td width=800>
 
<td width=800>
* The part number is automatically inserted in the current UI tube box above the menus.<br><br>
+
* The part number is automatically inserted in the "Displayed in UI" box above the menus.<br><br>
 
* The internal configuration engine was updated in order to solve some minor configuration file issues.<br><br>
 
* The internal configuration engine was updated in order to solve some minor configuration file issues.<br><br>
 
</td>
 
</td>

Revision as of 17:08, 14 May 2018

Vtube-laser logo 1.96.png


Revision 2.9.8

Release Date: In Development
Current Build: 7


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW - RESTORE WINDOW LOCATIONS for MULTISCREEN SETUPS

VTube now restores three main window's screen locations automatically when it loads.

VTube-LASER v2.9.8 threescreen.png




Check.jpgFIX- MTA (Measured Tube Averaging)

We discovered that the MTA feature would record all the tubes and build he average in Tube Data Storage, but would not copy it into main memory.

This has been fixed.

MTA Banner.png

MTAWindow.png



Check.jpgNEW - SHOW "SPLIT BENDS PRESENT" in WARNING HEADER

When Split Bends are present (180-degree bends or greater), then a new message displays in the header: "Split bends present", and turns the header yellow.

Vtube-laser v2.9.8 splitbendspresent.png



Check.jpgNEW - End-A and End-B OFFSET VALUES IN REPORTS

The offset values are the same as the old Supravision "tangent" end points in the Critical Reports section of the Inspection Data report.

The new tokens for this data are:

  • A-EndOffset
  • B-EndOffset

Vtl v2.9.8 EndOffsets.png



Check.jpgENHANCED - SPLIT BEND FEATURE

  • The Split Bend calculations in STEP mode are improved from previous versions.

  • The Split Bends are set to ACTIVE automatically when importing Split Bends.

Vts v2.9.8 splitbend improvements.png



Check.jpgENHANCED - FLOATING TOOL WINDOWS STAY ON TOP

The floating windows have some enhancements in this version that ensures that they stay on top of parent windows.





Check.jpgOTHER CHANGES

  • The part number is automatically inserted in the "Displayed in UI" box above the menus.

  • The internal configuration engine was updated in order to solve some minor configuration file issues.





Other Pages